Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Margate
Door installation in Margate, FL is not a simple swap job, and it has not been since the Florida Building Code began enforcing High-Velocity Hurricane Zone standards on every opening in this city. Most door replacements in Margate run $1,200 to $4,800 for an entry system, $900 to $2,600 for a storm door, and $2,500 to $7,500 for double or French doors, with the final figure driven by product approval requirements, frame condition, and whether the rough opening needs repair before the new unit goes in. We know this because we pull permits at Margate’s Building Division on Banks Road and we see what passes and what gets red-tagged. If you are standing in a 1970s concrete-block home off Margate Boulevard with a pre-code hollow-core front door, call (561) 264-1337 and we will walk you through exactly what the code requires before you buy anything.
Why TruePane Windows & Doors Is Margate’s Preferred Door Installation Company
Margate homeowners call us because we do not argue with the Building Division and we do not show up with a product that fails inspection. The city sits entirely inside the HVHZ, which means every door we install must carry a Miami-Dade Notice of Acceptance or a Broward County Product Approval, no exceptions. Our technicians measure every opening twice and quote manufacturer lines side by side on paper, so you see the NOA number, the wind-load rating, and the warranty terms before any work begins. Dale Kessler founded this company on a rule that still hangs on the whiteboard: if the pane is not true, the job is not done. That rule applies to every door jamb we set in Margate.
We have also learned what Margate’s older housing stock throws at a crew on install day. Many of the homes built between the mid-1960s and mid-1980s have rough openings that are not square, jambs that have absorbed forty years of South Florida humidity, and block walls that require specific anchoring details under HVHZ standards. A crew that only knows track-home construction will struggle here. Our Door Installation team has worked on enough of these homes to know which shim packs to carry and which flashings to use on a concrete-block opening. We quote the job once, we pull the permit, and a live person answers the phone at (561) 264-1337 if you have a question before inspection day.
Our Door Installation Services in Margate
Entry & Swing Doors
Most single-family homes in Margate still have the original front door they were built with. For a 1972 concrete-block rancher near Margate Boulevard, that usually means a pre-code hollow-core door with a steel jamb that has rusted through at the threshold. We replace those with impact-rated, NOA-certified entry systems anchored to the block wall per the current Florida Building Code detail. The upgrade also lets us address two things many Margate homeowners have wanted for years: a low-profile threshold that a walker rolls over easily, and weatherstripping that actually holds against the humidity that eats standard door sweeps.
Storm Doors
Margate’s inland location, roughly ten miles from the Atlantic, spares you the salt spray that corrodes frames in Pompano Beach, but the humidity and UV exposure still degrade aluminum storm door frames within a decade. Many of the storm doors we see in Margate’s 55+ communities are original to the house and have sagged hinges, failing closers, or glass inserts that no longer seal. We install new storm doors over code-compliant entry doors, and we do it in a single visit most of the time. The storm door itself must also meet Broward County product approval if it carries glass, which we handle as part of the permit package.
Double & French Doors
Double and French door installations in Margate condominiums and single-family homes run $2,500 to $7,500 depending on panel count, glass package, and whether the existing opening has settled out of square. Many of the low-rise condo units built in the 1970s and 1980s used single-track sliding glass doors, and we replace those with impact-rated French doors when owners want better access and a tighter seal. The opening must be re-flashed and the header checked against HVHZ uplift requirements, which is where less experienced crews make mistakes that show up as water intrusion the first heavy rain.
Pivot Doors
Pivot doors are a common upgrade request in Margate’s newer subdivisions and in custom remodels where the homeowner wants a wider, more dramatic entry. A pivot door hangs on top and bottom hinges instead of side hinges, which allows for a heavier slab and a cleaner look, but it also demands precise framing and a floor that can carry the load. We measure the rough opening twice, confirm the slab is rated for the weight, and register both manufacturer warranty layers before the truck leaves the driveway. For Margate homes, the pivot hardware and glass package still must carry an NOA, which we source from manufacturers we are authorized to install, including Pella and Marvin.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Margate
We are an authorized installer for more than a dozen manufacturer lines, including. That matters in Margate because the Building Division approves products, not promises. When we quote a Marvin entry door or a Pella double door, we put the NOA number and the wind-load rating on the quote sheet. We do not stock non-rated units for Margate jobs because they will not pass inspection, and we will not sell you something that gets red-tagged. Our Door Installation in Margate customers see both warranty layers registered in writing, with durations stated, on every job.
Common Door Installation Problems We See in Margate Homes
- Pre-code hollow-core doors with rotted jambs. Homes built in the 1960s through the early 1980s often still have the original front door. The jamb absorbs humidity for decades, the bottom rots, and the door binds or swings open on its own. The fix is a full replacement with an NOA-certified entry system, not a shim job.
- Non-impact doors installed by out-of-county crews. A contractor who does most of his work outside Broward County will sometimes quote a non-rated door to save money on an “inland” job. Margate’s Building Division on Banks Road enforces the same NOA-certified product list as oceanfront cities, and that door gets red-tagged at final inspection.
- Zero-threshold retrofits that ignore clear width. Aging-in-place work is common in Margate’s retirement communities, but a zero-threshold entry door that is still only 30 or 32 inches wide will not fit a wheelchair comfortably. The current standard is a 36-inch clear opening. We check that during the measure and advise before we order the unit.
- Unflashed sliding door replacements in condos. Seasonal residents in 1970s condo buildings sometimes replace a sliding glass door with a cheaper non-rated unit while they are away. The first heavy rain wicks water past the unflashed rough opening into the slab. We re-flash every opening we touch, and we pull the permit so the work is on record.
Pricing for Door Installation in Margate, FL
Here is what we charge in Margate’s market, based on the jobs we have quoted and completed in this city.
| Door Type | Typical Margate Range |
|---|---|
| Entry & Swing Doors (impact-rated, NOA-certified) | $1,200 - $4,800 |
| Storm Doors (Broward County approved) | $900 - $2,600 |
| Double & French Doors (impact-rated) | $2,500 - $7,500 |
| Pivot Doors (custom, NOA-certified) | $3,500 - $9,000 |
What moves the number is product approval cost, which is fixed by the code but can vary by manufacturer, the condition of the rough opening, and any widening or structural work needed to meet current clear-width standards. A 36-inch entry door in a 1970s Margate concrete-block home may need a non-bearing header adjustment, which adds labor and framing material. We give you a written, line-item quote before any work starts, and the price will not change once we begin. Call (561) 264-1337 to schedule a free estimate, and we will send a background-checked, uniformed technician to measure the opening and walk you through the permit requirements for your home.
We Also Serve Cities Near Margate
Our service area extends from Margate into Coconut Creek, Coral Springs, Pompano Beach, and Deerfield Beach. If you live near the Margate-Coconut Creek line off Sample Road, or in a Coral Springs neighborhood just west of the Turnpike, we will come measure your door opening and quote it the same way we quote Margate jobs: honestly, with the permit requirements spelled out. Call (561) 264-1337 and a live person will answer.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Margate
Yes. Margate sits entirely within Broward County’s High-Velocity Hurricane Zone, one of only two counties in the United States that carries that designation, and inland location does not reduce the wind-load requirements. Every door replacement in Margate, including a simple front entry swap, must carry a Miami-Dade Notice of Acceptance or a Broward County Product Approval. If a contractor tells you an “inland” door is fine in Margate, he has not pulled a permit at the Building Division on Banks Road recently. Call (561) 264-1337 and we will show you the NOA number on the quote before you buy.
You can widen a front doorway in a Margate concrete-block home, and yes, it requires a permit. The current standard for aging-in-place work is a 36-inch clear opening, which most 1960s and 1970s homes in this city do not have. The job typically involves cutting the block, installing a wider header, and re-anchoring the new door frame to the block wall per HVHZ detail. We handle the permit, the structural work, and the door installation, and the final price is in the written quote before any cutting starts. Call (561) 264-1337 for a free measure and a line-item estimate.
The most common failure is a rotted jamb combined with a pre-code hollow-core door that no longer seals. On a 1972 concrete-block home near Margate Boulevard, our crew replaced a front door after decades of South Florida humidity had rotted the original jamb and left the door binding every summer. Hinge screws pulled loose from the block, and the threshold had dropped. A shim job would have bought six months. The proper fix is a full replacement with an NOA-certified entry system, a fusion-welded frame, and modern flashing. Call (561) 264-1337 for an exact diagnosis on your door.
For seasonal residents in Margate’s low-rise condos, a fiberglass entry door with a factory-finished surface holds up better than wood or bare aluminum while you are away. Fiberglass does not absorb humidity the way wood does, and it will not corrode like the original aluminum frames many 1970s and 1980s condo units still have. Pair it with stainless steel hinges and a low-profile threshold, and make sure the rough opening is re-flashed so the first heavy rain does not wick water into the slab. Call (561) 264-1337 and we will quote the right unit for your condo’s wind-load requirements.
An ENERGY STAR door will help at that opening, but it will not offset the heat gain coming through the original single-pane windows common in Margate’s 1960s through 1980s homes. A typical three-bedroom concrete-block rancher in this city loses more cooling through the windows than through the front door. If your budget allows, we will quote the door and the windows side by side so you see the cost difference and can decide in one visit. Call (561) 264-1337 and we will bring the manufacturer lines on paper, not on a screen.
Call TruePane for Door Installation in Margate
We have been setting doors in Margate long enough to know which products pass Broward County inspection and which ones get red-tagged on Banks Road. We measure every opening twice, quote manufacturer lines side by side in writing, pull the permit, and register both warranty layers before the truck leaves your driveway. If the pane is not true, the job is not done. Call (561) 264-1337 now to schedule your free estimate, and a live person will answer the phone.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Margate with code-compliant, NOA-certified door installation backed by the Done Right Promise and The Keystone Standard.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.