Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Coral Springs
Door installation in Coral Springs usually means working on a concrete block home built between the late 1960s and early 1990s, and that changes how the job should be done. We’ve set enough doors in Coral Springs to know that the original rough openings often do not match the nominal door size, the old flashing has failed, and the HOA will want to see a bronze anodized finish that matches the rest of the 1970s tract. Call (561) 264-1337 and we’ll come measure, explain what we find, and give you a written quote before any work begins.
Why TruePane Windows & Doors Is Coral Springs’s Preferred Door Installation Company
We’ve been setting doors in Coral Springs long enough to know the difference between a house in the Woodside plat and one in West Glen. The homes are mostly CBS construction with rough openings that have shifted a quarter inch here, a half inch there over forty or fifty years. A door that’s ordered straight from the warehouse and shoved into that opening will bind by August. We measure every opening twice, and we build the install around what the house actually is, not what the spec sheet says it should be.
Coral Springs customers call us because we pull the Broward County permit before we start, we pre-clear the product line with the HOA architectural review board, and we register both manufacturer warranty layers in writing before the truck leaves the driveway. That’s The Keystone Standard, and it’s how we’ve worked since Dale Kessler started this company. No surprise change orders. No unpermitted work that surfaces when you go to sell. We stand behind every door we set, and our Done Right Promise says so in plain language.
When you call TruePane, a live person answers the phone. Not a recording, not a call center. You will talk to someone who knows Coral Springs and can schedule a time for a background-checked, uniformed technician to come look at your door. That matters when you have had a fogged sidelight for three years and you want a straight answer about what it will cost to make it right.
Our Door Installation Services in Coral Springs
Entry and Swing Doors
We replace more entry doors in Coral Springs than any other type, and most of them are going into original openings that date to the Coral Ridge Properties build-out. The old door is usually painted steel or aluminum with a single-pane sidelight that does not meet Florida’s post-1994 wind-borne debris code. We set impact-rated fiberglass and steel doors from manufacturers like PGT and CGI, matched to the bronze anodized finish the local HOAs expect. A new entry door in Coral Springs typically runs $1,800 to $4,200 installed, depending on the slab, frame work, and glass package.
Double and French Doors
Double door installations in Coral Springs carry one complication most people do not see coming: the HOA review board is going to look at the mullion profile and glass tint against the original bronze aluminum standard. We have handled enough of these in the Cypress Run and Eagle Trace areas to know which product lines clear review without a fight and which ones will get bounced back. A good double door replacement here runs $3,500 to $7,500, and that includes pre-clearing the finish with the association before we order anything.
Bifold and Folding Doors
Bifold and folding doors are increasingly common in Coral Springs lanai conversions and patio enclosures, and the permit path from Door Installation through Broward County is straightforward when the product is tested for the wind zone. We set folding door systems that carry a Florida Product Approval number, which is the one document a Coral Springs inspector will ask for first. Plan on $4,500 to $9,000 for a properly flashed, impact-rated folding door in this market.
Pivot Doors
Pivot doors are a newer look in Coral Springs, usually requested by homeowners doing a full facade update on a 1980s contemporary in the Country Club or Ramblewood sections. They demand a much heavier header and a reinforced jamb than a standard hinge door, and that’s where we see problems from unqualified installs. We frame the opening to carry the load, and we quote the structural work as a separate line item so you see exactly what the door costs and exactly what the framing costs. Expect $4,000 to $8,500 for a true pivot door install here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coral Springs
We are an authorized installer for more than a dozen manufacturer lines, and for Coral Springs homes we most often quote PGT and CGI impact-rated doors, with ES Windows available for higher-end custom work. Because we are local to South Florida, we can get parts and replacement sashes for Coral Springs jobs faster than a contractor ordering from out of state. We quote the manufacturer lines side by side on paper so you can see exactly what you are buying, and we register both warranty layers in writing before the truck leaves the driveway.
Common Door Installation Problems We See in Coral Springs Homes
- Failed sidelights and transoms. Those original single-pane aluminum sidelights next to a 1970s entry door do not meet current impact code. Any permitted replacement triggers a full upgrade, and unqualified contractors sometimes skip the permit to save you money, leaving you with a door that fails inspection or insurance review when it matters.
- Rotted or compromised framing behind the old jamb. In CBS construction, the wood buck around a door opening collects moisture from failed flashing tape and years of driven rain. We find this on about half the Coral Springs doors we replace, and we reframe to meet Broward County wind-borne debris requirements before the new door goes in.
- HOA finish rejection. Coral Springs has deed restrictions that trace back to Coral Ridge Properties, and the review boards enforce them. You order a white vinyl door, the HOA rejects it because the original is bronze anodized aluminum, and now you have lost three weeks and a restocking fee. We pre-clear every door with the association before we pull the permit.
- Doors that bind in summer humidity. Coral Springs’s afternoon thunderstorms and year-round humidity move concrete block openings minutely but persistently. A door set too tight in January will stick in June. We account for that when we set the reveal.
Pricing for Door Installation in Coral Springs, FL
Here is what honest pricing looks like in Coral Springs. A standard entry door replacement runs $1,800 to $4,200. A storm door runs $700 to $1,600 installed. Double French doors run $3,500 to $7,500. The biggest cost drivers are finish matching for HOA compliance, framing repairs behind the old jamb, and whether the door carries an impact rating or not. We quote every job with a written line item for each of those so there is no change order sitting at the bottom of the bill. Call (561) 264-1337 for a free estimate, and we’ll measure your opening, check the framing, and tell you in plain terms what it will take.
We Also Serve Cities Near Coral Springs
We take the same approach to door installation in Margate, Coconut Creek, Pompano Beach, and Deerfield Beach, and our crews draw from the same local office so scheduling works the same. If you’re outside the city but nearby, Door Installation in Coral Springs is still the page to read for how we handle Broward permitting and HOA finish rules, and we are glad to come see your door too.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Coral Springs
In nearly every deed-restricted community in Coral Springs, yes, you need HOA architectural review board approval before you replace a front door. The boards are holdovers from Coral Ridge Properties’s original deed restrictions, and many require replacement doors to match the bronze anodized aluminum finish of the 1970s and 80s originals. We pre-clear the product line and finish with your HOA before we order or pull a permit, which saves weeks and prevents a rejection that would otherwise force a reorder. Call (561) 264-1337 to start that process and get an exact quote.
We reframe it. In concrete block homes, the wood buck around a door opening collects decades of moisture from failed flashing, and we find rot or compromise on roughly half the Coral Springs doors we pull. We inspect the rough opening before we set anything, and if there is damage, we quote the repair as a written line item so you approve it in writing before we touch it. The new door then goes into a frame that meets Broward County wind-borne debris requirements.
In most cases, yes, provided the existing entry door is sound and the storm door clears your HOA’s finish requirements. A storm door install in Coral Springs runs $700 to $1,600 depending on the glass and whether it is impact-rated. We check the reveal, confirm the hinge side will carry the additional weight, and pre-clear the product with your association if your community requires it.
Because Coral Springs sits in inland Broward County where sustained hurricane-force winds are a real, documented threat. There is no coastal exemption and no lower wind-speed tier for this area. Any permitted door replacement must use a product tested to Florida Building Code wind-borne debris standards, and that typically means impact-rated glazing in any sidelight or glass panel. We only set doors that carry a Florida Product Approval number.
You will see fogging or condensation between the panes that you cannot wipe off, or in late afternoon light you may notice a white haze inside the glass. Coral Springs’s heat and humidity accelerate seal failure on west- and south-facing doors especially. A failed insulated glass unit cannot be repaired by resealing; the glass unit or the door slab gets replaced. Call (561) 264-1337 and we’ll come tell you whether you need a new unit or a new door, and quote it either way.
For a straight answer on door installation in Coral Springs, call TruePane Windows & Doors at (561) 264-1337. We measure twice, pull the permit, clear the HOA, and register both warranty layers before we leave your driveway. The estimate is free and it is in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coral Springs and Broward County with the Done Right Promise and The Keystone Standard since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.