Door Installation in Coconut Creek - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across Coconut Creek

Door installation in Coconut Creek, FL carries a cost most homeowners don’t see coming: the inspection of what’s behind the old jamb. A standard entry door replacement runs $1,400 to $3,800. A French door set runs $2,600 to $5,200. An impact-rated slider runs $3,800 to $7,500. But the number that matters is what we find when we pull the old unit. In Coconut Creek’s 1970s and 80s condo stock, that often means corroded aluminum frames, water-damaged rough openings, and a Broward County permit that ties the whole job to code. We’ve handled enough of these to know exactly what to expect, and we quote it honestly before the first screw comes out. Call (561) 264-1337 for a free estimate.

Call (561) 264-1337

Why TruePane Windows & Doors Is Coconut Creek’s Preferred Door Installation Company

We’ve been working in Coconut Creek long enough to know the HOA approval process at Wynmoor Village, the frame-color mandates in the city’s 55-plus communities, and which Miami-Dade NOA products will pass a Broward architectural board review on the first submission. That local knowledge saves our Coconut Creek customers weeks of back-and-forth and reorder delays.

Our Door Installation team is led by Dale Kessler, a second-generation glazier who founded TruePane in 2008 on a rule that still hangs on the whiteboard: if the pane is not true, the job is not done. Every crew member is background-checked and uniformed. Every opening gets measured twice. Every manufacturer warranty layer gets registered in writing before the truck leaves your driveway.

We’re not a franchise playbook. We hire locally, train apprentices into journeymen, and have spent years in this community. When someone in Wynmoor Village or the Township calls us, they reach a live person, not a voicemail tree. That’s the standard, 24 hours a day.

Our Door Installation Services in Coconut Creek

Coconut Creek’s housing stock demands specific expertise. Most homes here are concrete block condominiums and attached villas built between 1973 and 1995, many in age-restricted communities with original builder-grade sliding doors. Those original units weren’t impact-rated. They weren’t energy-efficient. And they weren’t built to survive 40 years of South Florida humidity. Here’s how we handle the most common requests.

Entry & Swing Doors

Entry door replacement in Coconut Creek typically means replacing a hollow-core or aged steel unit with something that actually seals against wind-driven rain and humidity. In concrete block construction, the rough opening is fixed, so proper framing and shimming matter more than the door itself. We carry and install entry systems from Pella, Marvin, and Jeld-Wen, always with a Miami-Dade NOA where the Broward permit requires it.

Double & French Doors

French doors are popular in Coconut Creek villas, but the original units from the 1980s usually have rotted bottom rails and fogged glass. We don’t do glass swaps on a rotten frame. We replace the entire pre-hung unit with a properly flashed, squared, and sealed installation. In Wynmoor Village specifically, we’ve found that replacing a French door without first resetting the concrete sub-sill leads to the same binding problem within two years. We fix the opening first, then set the door.

Bifold & Folding Doors

For Coconut Creek condo owners who want a wider opening without a major structural change, bifold and folding door systems make sense, but only if the header above the opening can carry the load. Many of these 1970s and 80s buildings used undersized headers. We inspect, pull the Broward permit, and reinforce where code requires it. There’s no shortcut on a folding door. The weight has to be carried properly or the track sags within the first season.

Pivot Doors

Pivot doors are a growing request in Coconut Creek’s higher-end villa renovations. A properly hung pivot door distributes weight through the floor and header hinges rather than the side jamb, which can work well in concrete block walls. But the rough opening has to be dead plumb and square. In older Coconut Creek homes, we frequently need to reframe the opening before the pivot hardware goes in. That’s the difference between a door that swings clean and one that drags in July after the humidity does its work.

Sliding Glass Doors

Sliding glass doors are the single biggest failure point in Coconut Creek condos. The original aluminum frames corrode from decades of interior humidity and exterior moisture. Rollers grind against pitted tracks. Panels bind. The fix is rarely just new rollers. We reset the frame, square it, and install a new impact-rated slider with a NOA. On a villa in Wynmoor Village, our crew reset a corroded original aluminum sliding door track that had warped from decades of humidity before installing a Miami-Dade NOA-approved impact-rated double door with bronze anodized frame to match the HOA’s mandated spec. Within three weeks, two neighbors in the same building had scheduled the identical replacement after seeing the clean, squared install.

Impact-Rated Entry Doors

Every exterior door in Coconut Creek should be impact-rated, full stop. Broward County sits in Florida’s High-Velocity Hurricane Zone, and the code enforcement is not optional. We install impact-rated entry systems from Marvin and PGT, both with valid Miami-Dade NOAs, and we pull the Broward permit on every job. No permit, no install. That protects you, your HOA’s standing, and your insurance.

Trusted Brands We Service in Coconut Creek

We’re an authorized installer for more than a dozen manufacturer lines, and for our Coconut Creek customers we stock and special-order the profiles local boards actually approve. That means Pella and Marvin entry systems, Jeld-Wen and Milgard sliders, and PGT impact products with Miami-Dade NOAs already run through our supply chain. We quote manufacturer lines side by side on paper so you see exactly what you’re buying. No mystery. No last-minute substitutions.

Common Door Installation Problems We See in Coconut Creek Homes

After hundreds of door replacements across Coconut Creek, the same four failure modes show up again and again. We plan for them before we start, not after the jamb is open.

• Corroded out-of-square original frames. The old aluminum frame has warped over decades of humidity, so the new door won’t seal no matter how carefully it’s hung. We reset and square the frame before the new unit goes in. Skipping this step is the number one reason “new” doors bind in Coconut Creek condos.
• HOA frame-color mismatch. Coconut Creek’s 55-plus communities often mandate bronze or white anodized frames to match the original 1970s aesthetic. Pulling standard inventory and submitting for approval without checking the board’s spec wastes two to three weeks. We verify the HOA requirement before we order.
• Rot and water damage behind the jamb. Decades of wind-driven rain seep into the rough opening, and once the old door is out, the framing is soft. We write allowance language into our contracts for exactly this. If we find bad wood, you approve the repair cost in writing before we proceed.
• Skipped permits and non-NOA products. A door without a Miami-Dade Notice of Acceptance, or a file without a Broward permit, fails inspection and leaves the opening uninsurable during hurricane season. We don’t work that way. Permits get pulled. Inspections get passed.

Pricing for Door Installation in Coconut Creek, FL

How HOA Approval Works for Door Replacement in Coconut Creek

If you live in one of Coconut Creek’s age-restricted communities, especially Wynmoor Village, the first step on any door replacement is HOA architectural board approval. Boards here often mandate a specific frame color, typically bronze or white anodized aluminum, to match the community’s original 1970s appearance. They also require product specifications before issuing the approval letter. We handle that submission for you. We know what these boards ask for, we stock the compliant profiles, and we don’t order anything until the approval is in writing. That single step eliminates the most common delay Coconut Creek homeowners face: a non-compliant door sitting in a warehouse while the board rejects the submission and the homeowner waits weeks for a reorder.

This matters more in Coconut Creek than almost anywhere else in Broward County. The city’s residential market is overwhelmingly defined by massive 1970s and 80s 55-plus condo communities, most notably Wynmoor Village, one of Florida’s largest age-restricted developments with thousands of nearly identical units. Original aluminum single-pane, non-impact-rated doors are aging out en masse. And because floor plans repeat building to building, a contractor who earns that approval and delivers clean results often converts a single unit into a pipeline of dozens of neighbors in the same complex. That’s exactly how our work spreads through Wynmoor: one clean install, then the neighbors call.

We Also Serve Cities Near Coconut Creek

Our crews serve Coconut Creek and the surrounding communities, including Margate, Pompano Beach, Coral Springs, and Deerfield Beach. Dispatch and scheduling are coordinated from our Miami (South FL) office, and our local crews know the HOA boards and permit offices across northern Broward County well enough to keep your project moving without surprises.

FAQs - Door Installation in Coconut Creek

Contact TruePane Windows & Doors in Coconut Creek

If you’re ready to replace a door in Coconut Creek, call us at (561) 264-1337. A live person answers. We’ll schedule a free estimate, measure your opening, and walk you through the HOA approval and permit process step by step. You’ll get a written line-item quote with no change orders you haven’t approved and a Done Right Promise on every job. We stand behind the work, the warranty, and the promise, in writing.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coconut Creek and surrounding Broward County communities.