Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Coral Springs
Custom window and door work in Coral Springs carries a set of rules most South Florida contractors never mention until the permit stalls. Broward County permitting, Florida impact code, and HOA architectural review all stand between you and a finished opening. We have been navigating that three-part gauntlet for years, and we know which product lines clear Coral Springs review boards without a restart. If you live in a pre-1992 CBS home with original aluminum single-panes or jalousies, call (561) 264-1337 for a free estimate. We will walk the job with you before any paperwork starts moving.
Why TruePane Windows & Doors Is Coral Springs’s Preferred Custom Windows & Doors Company
We are a second-generation glazier outfit, not a franchise. Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. That means our Custom Windows & Doors team measures every rough opening twice, quotes product lines side by side on paper, and registers both manufacturer warranty layers in writing before the truck leaves your driveway.
Coral Springs customers deal with a specific set of frustrations: HOA boards that reject finishes after the Broward permit is issued, builder-grade jalousies that fail wind-borne debris testing, and seal failure from thirty-plus years of humidity and afternoon thunderstorms. We know those problems because we work them every month. Our background-checked, uniformed technicians live and work in this market. A live person answers the phone 24 hours a day, seven days a week, not a call center. When you call about a fogged insulated unit on a west-facing elevation in Cypress Run, the person on the line understands what you are describing.
Our Custom Windows & Doors Services in Coral Springs
Our work in Coral Springs concentrates on the openings that give older master-planned homes trouble, plus the custom work newer homes eventually need. Here is what we handle most often.
Custom Shape Windows
Coral Springs has thousands of homes built between 1968 and 1992 with arched, radius, octagonal, and eyebrow window configurations that big-box replacements will not fit. We measure and fabricate custom shape windows to match the original rough opening, so you keep the architectural line of the house. On a 1970s Cypress Run split-level, that often means radius tops paired with bronze anodized aluminum frames the HOA will accept without comment.
Architectural Grilles & SDLs
Simulated divided lites, or SDLs, are the difference between a replacement window that looks factory-original and one that announces itself as an afterthought. Many Coral Springs HOAs specifically ask for grille patterns on street-facing elevations to preserve the subdivision’s original character. We quote SDL patterns side by side with the grille-free option, so you see exactly what the architectural review board is asking for and what it costs.
Commercial Storefront Glazing
Coral Springs’ commercial corridors along University Drive and Sample Road run on storefront systems that take direct afternoon sun. We replace failed insulated glass, reframe worn aluminum storefronts, and bring entries up to current wind-load standards. Our crews carry commercial glazing experience with the same estimator and the same warranty discipline as our residential work.
Curtain Wall Systems
For the larger commercial and mid-rise buildings scattered through Coral Springs’ office parks, we install and repair curtain wall glass and framing. These systems demand precise measurement and load calculations. We do the takeoff once, order to spec, and install without leaving a half-finished mullion line for someone else to fix.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coral Springs
We are an authorized installer for more than a dozen manufacturer lines, and for Coral Springs replacements we recommend what actually clears your HOA and Broward County review. Jeld-Wen and PGT both offer bronze anodized aluminum finishes that match 1970s and 1980s Coral Ridge Properties originals. Simonton carries solid impact-rated vinyl options for homes where the HOA has relaxed its finish rules. We keep local relationships with these manufacturers tight, which means faster turnaround on odd sizes and custom grille patterns for Coral Springs jobs. We do not push one brand. We show you the numbers and the finishes side by side and let you decide.
Common Custom Windows & Doors Problems We See in Coral Springs Homes
- HOA rejects the finish after the permit is pulled. A homeowner picks white vinyl, Broward County issues the permit, and then the architectural review board bounces it because original bronze anodized aluminum is required. Now the clock restarts and the opening sits uncovered for weeks. We pre-clear the product line with your HOA before we pull the permit.
- Fog between panes in original insulated glass. Seals fail after 30 to 55 years of Coral Springs humidity and daily thunderstorm exposure. The unit loses its argon fill and fogs. We replace the insulated glass unit, not the entire window, when the frame is still sound.
- Jalousie windows fail wind-borne debris testing. Pre-1992 CBS homes in Coral Springs were built with jalousie or louvered windows that cannot meet Florida’s post-1994 impact code. You cannot get a permit for a simple repair. The fix is often a full replacement with impact-rated double-hungs in a finish your HOA will accept.
- West-facing frame corrosion. Afternoon sun and salt-adjacent humidity eat original aluminum frames at the jamb and sill. We see it on nearly every corner-lot home in Coral Springs’ older subdivisions. Once the frame goes, the opening leaks and the only real fix is replacement.
Pricing for Custom Windows & Doors in Coral Springs, FL
Custom shape windows in Coral Springs typically run $800 to $2,400 per opening, depending on size, radius, impact rating, and finish. Architectural grilles and SDLs add $120 to $380 per window on average. A full jalousie-to-impact-rated-double-hung replacement on a 1970s CBS home sits between $1,400 and $3,200 per opening installed, including permit coordination and HOA pre-clearance. Commercial storefront reglazing starts around $65 per square foot for standard insulated units and runs higher when the frame needs structural work. These are real ranges for this market, not national averages. The exact number depends on rough opening size, wind zone calculations, and what your HOA will approve. Call (561) 264-1337 and we will give you a written, line-item quote. No surprises on the bill later.
We Also Serve Cities Near Coral Springs
TruePane handles custom window and door work throughout northwestern Broward County. We regularly serve Margate, Coconut Creek, Pompano Beach, and Deerfield Beach. If you are just outside Coral Springs proper, the same crew, the same warranty discipline, and the same Done Right Promise still apply. Call (561) 264-1337 and we will have an estimator out to your street.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Coral Springs
Because Coral Ridge Properties wrote architectural consistency into the original deed restrictions when it master-planned the city, and many HOA boards still enforce those standards today. Bronze anodized aluminum was the dominant frame finish on homes built here between roughly 1968 and 1992, so review boards often require replacements to match. White vinyl can be rejected outright. We keep bronze anodized options from Jeld-Wen, PGT, and Simonton on our quote sheets for exactly this reason. Call (561) 264-1337 and we will pre-clear the finish with your HOA before any permit is pulled.
Yes, and in most cases you must. Jalousie and louvered windows installed before Hurricane Andrew cannot pass current wind-borne debris testing under Florida Building Code. Broward County will not issue a repair permit for them. A full replacement with impact-rated double-hungs or casements is the standard path, and the good news is that the code-compliant replacement usually lowers your windstorm insurance premium. We coordinate the permit, the HOA review, and the install so the opening is not left exposed between steps. Call (561) 264-1337 for a free estimate.
Read the warranty language before you start and do not modify the rough opening or structural framing without checking whether it voids coverage. Most builder warranties remain valid when you replace windows with code-compliant units installed by a licensed contractor, as long as flashing and water-resistive barrier details are maintained. We document every step with photos and a written scope of work, which gives you a record if a warranty dispute ever comes up. Call (561) 264-1337 and we will review your builder warranty language with you before we quote the job.
Seal failure. The desiccant inside the spacer bar saturates after decades of Coral Springs humidity and daily thermal cycling, then the argon or krypton fill leaks out and moist air gets in. You get fog, mineral deposits on the inner glass, and a unit that loses its insulating value. We replace failed insulated glass units in the field when the frame is still structurally sound, which is usually half the cost of a full window replacement. Call (561) 264-1337 and we will tell you whether your failed units are worth reglazing or if the frames are too far gone.
Usually yes, because grilles change the exterior appearance of the home and most Coral Springs HOA rules treat any visible exterior modification as a review item. The practical answer is to submit the grille pattern and frame finish at the same time, so the review board sees the complete elevation. We prepare that package for you, and we have cleared dozens of SDL patterns through Coral Springs architectural review boards without a restart. Call (561) 264-1337 and we will help you get it right the first time.
Why Local Knowledge Matters on This Job
Most of the homes in Coral Springs were built in a master-planned rollout from the mid-1960s through the early 1990s. That creates an unusually concentrated stock of pre-Andrew CBS construction where original aluminum single-pane windows are now failing across entire subdivisions at the same time. Whole tracts share nearly identical rough-opening dimensions, which means a crew that has worked one house on a given street already knows the measurements, the wall depth, and the HOA quirks for the neighboring homes. That is not information you get from a regional installer who drives up from Miami for the day.
On NW 87th Drive in the Cypress Run community, we replaced a 1979 jalousie window system with custom bronze-anodized impact-rated double-hungs after the original aluminum frames had corroded at the jamb. Our crew pre-cleared the finish with the HOA’s architectural committee before pulling the Broward County permit, then installed fusion-welded frames with low-E argon-filled insulated glass units so the west-facing elevation no longer bakes in the afternoon sun. That sequence, HOA first, permit second, install third, is the order that keeps Coral Springs jobs from stalling.
Get a Free Estimate for Custom Windows & Doors in Coral Springs
If you live in Coral Springs and your windows are fogged, corroded, or leaking, or if your HOA has told you the current units will not pass review, call us. We will send a background-checked technician to measure the openings, show you product lines side by side on paper, and give you a written quote that will not change when the bill arrives. TruePane stands behind every job with the Done Right Promise and The Keystone Standard, both warranty layers registered in writing before the truck leaves the driveway. Call (561) 264-1337 to schedule your free estimate. We will be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coral Springs with custom window and door craftsmanship since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.