Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Energy-Efficient Windows Across Delray Beach
Energy-efficient window replacement in Delray Beach typically runs $850-$1,900 per opening installed, with most full-home projects on 1950s-1970s CBS homes landing between $14,000 and $32,000 depending on opening count and impact-glazing requirements. Most jobs are custom-sized because Delray Beach’s masonry homes rarely match modern standard window dimensions. If you’re calling from Lake Ida, Osceola Park, or anywhere west of Federal Highway, we know your house before we pull up. Call (561) 264-1337 and a live person answers, day or night.
We’re TruePane Windows & Doors, and we’ve been replacing windows in Palm Beach County long enough to know that Delray Beach is not Boca Raton. The housing stock is older, the lots are tighter, and the code requirements are more layered. Our Energy-Efficient Windows team handles the full scope: energy audits, custom sizing, impact-laminated low-E glass, and installation that actually seals against salt air and hurricane winds. This page is for Delray Beach homeowners who want specific answers before they pick up the phone.
Why TruePane Windows & Doors Is Delray Beach’s Preferred Energy-Efficient Windows Company
Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. That standard carries weight in a city where the building stock itself fights you. Homes in Delray Beach west of Federal Highway were mostly built between 1950 and 1975, and their concrete block walls create rough openings that don’t accept box-store window sizes. We measure twice, order custom, and register both warranty layers in writing before the truck leaves your driveway. No arguing later about what was covered.
Our technicians are background-checked, uniformed, and trained as apprentices before they ever run a job alone. The person who shows up at your Delray Beach home is employed by us, not subcontracted out to someone we met last week. We sponsor county fairs and church roof funds because we plan to be in South Florida in thirty years, answering the same phone number. When a live person answers at 3 a.m. because a window failed after a storm, that’s not a service feature. That’s the whole point.
Our Energy-Efficient Windows Services in Delray Beach
Low-E & Argon Gas Glass
Low-E coatings reflect infrared heat while letting visible light through, and argon gas between panes slows thermal transfer. In Delray Beach’s climate, this combination cuts cooling load measurably. We stock low-E glass upgrades for existing frames where the frame is structurally sound, and we pair them with marine-grade hardware when the home sits near the Intracoastal. A typical low-E retrofit in Delray Beach runs $450-$750 per opening. For homes east of A1A, we recommend low-E with a heavier tint profile to manage glare off the water.
ENERGY STAR Replacement Windows
ENERGY STAR certification for South Florida requires a U-factor of 0.40 or lower and a solar heat gain coefficient (SHGC) of 0.25 or lower. We quote ENERGY STAR units side by side with non-certified options on paper so you can see the difference in writing. In Delray Beach, most ENERGY STAR replacements are also impact-rated because Palm Beach County’s coastal wind zone requires it. A standard ENERGY STAR impact window for a Delray Beach CBS home runs $1,100-$1,700 per opening installed. We register both the glass warranty and the frame warranty before we leave, with the durations stated on your paperwork.
Double & Triple Pane Windows
Double-pane is the baseline for any replacement in Delray Beach. Triple-pane adds a third lite and a second insulating cavity, which helps with both thermal performance and sound attenuation. For homes along Federal Highway or near Tri-Rail crossings, triple-pane makes a real difference in street noise. Triple-pane impact units in Delray Beach typically run $1,500-$2,400 per opening. We tell customers straight: if you’re more than two blocks from a major road or rail line, double-pane with argon and low-E is usually the better dollar-for-dollar choice.
UV-Blocking & Fade Protection
South Florida sun bleaches furniture, floors, and artwork fast. Our UV-blocking glass options reduce UV transmission by up to 99% while preserving visible light. This matters in Delray Beach particularly for homes with east-facing windows near the Intracoastal, where morning sun hits hard and salt haze amplifies glare. We can apply UV-blocking window films as a lower-cost option or specify laminated glass with built-in UV protection in replacement units. A full-home UV protection package in Delray Beach runs $2,500-$6,000 depending on window count and whether we’re applying film or replacing glass.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Delray Beach
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Delray Beach homes we commonly specify PGT, CGI, and ES Windows. PGT’s WinGuard line is a workhorse for CBS openings because it handles custom sizing without a custom price premium. CGI makes heavy-duty impact units that hold up to salt-air exposure better than standard aluminum. ES Windows is our go-to for historic district work because their custom divided-lite profiles replicate original colonial and casement patterns while carrying Florida Product Approval. We keep local parts inventory for all three, so service calls in Delray Beach don’t wait on a warehouse in Tampa. If you want side-by-side quotes on paper, we do that as standard practice.
Common Energy-Efficient Windows Problems We See in Delray Beach Homes
- Salt-air corrosion destroying frames and hardware. Homes east of A1A and along the Intracoastal Waterway in Delray Beach lose standard aluminum window frames in as few as 3-5 years. The corrosion starts at the weep holes and hardware, then moves to the frame corners, and air leaks follow. We replace with marine-grade finishes or PVC/fiberglass frames that don’t oxidize the same way.
- Off-the-shelf units jammed into non-standard CBS openings. The 1950s-1970s concrete block homes in neighborhoods like Lake Ida have rough openings that don’t match modern stock sizes. When a box-store window gets forced in, the perimeter seal is usually compromised from day one, and drafts and moisture intrusion follow. We modify each frame on-site for a true fit.
- Historic district replacements that skip custom profiles. Delray Beach’s certified historic districts, including Nassau Park and Old School Square, require replacement windows to replicate the original profile and divided-lite pattern. A generic energy-efficient unit will fail preservation review, and a non-impact unit will fail Palm Beach County’s wind-load code. The redo costs more than doing it right the first time.
- Fogged or failed seals on jalousie-era replacements. Many Delray Beach homes replaced original jalousie windows decades ago with early-generation dual-pane units. Those seals have failed, and the fogged glass isn’t just ugly: it means the insulating gas is gone and the window is barely better than single-pane. We replace the glass unit, not the whole frame, when the frame is sound.
Pricing for Energy-Efficient Windows in Delray Beach, FL
Here’s what Delray Beach homeowners can expect to pay, based on the work we’ve done across the city:
| Project Type | Typical Range (Installed) |
|---|---|
| Single low-E impact window, standard CBS opening (custom-sized) | $850-$1,400 |
| ENERGY STAR impact window, historic district profile | $1,400-$2,200 |
| Triple-pane impact unit, marine-grade frame (east of A1A) | $1,700-$2,600 |
| Whole-home replacement (8-14 openings), 1960s CBS home | $14,000-$32,000 |
| Window energy audit with written report and recommendations | $250-$450 |
These are installed prices, not “from” prices that climb once we see the opening. Two things drive cost in Delray Beach more than anything: custom sizing for masonry openings and impact-glazing requirements for the coastal wind zone. Historic district review adds time but usually not much cost if the profiles are ordered correctly from the start. Call (561) 264-1337 for a free estimate. We’ll send a background-checked technician to measure every opening and give you a written, line-item quote on paper.
We Also Serve Cities Near Delray Beach
In addition to Delray Beach, our crews handle energy-efficient window replacement in Boynton Beach, Boca Raton, Deerfield Beach, and Coconut Creek. The housing stock differs in each: Boca and Boynton have more 1980s-2000s tract construction with standard rough openings, while Deerfield Beach and Coconut Creek have their own CBS-era neighborhoods. The code requirements shift at the county line. We quote each city on its own terms. Call (561) 264-1337 with your address and we’ll tell you what applies.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Delray Beach
Yes. Delray Beach’s certified historic districts, including Nassau Park and the Old School Square area, require replacement windows to replicate the original profile and divided-lite configuration of the historic units. That means a homeowner in a designated historic district can’t install a generic flat-pane energy window, even if it meets ENERGY STAR standards. They need impact-laminated glass fabricated in custom colonial or casement patterns that satisfy both the city’s preservation board and Palm Beach County’s ~140 mph wind-load code. We’ve sourced dual-compliance units for historic Delray Beach homes, and the key is ordering the right profile from the start so review passes the first time. Call (561) 264-1337 if you’re unsure whether your street is in a designated district.
Salt air east of A1A and along the Intracoastal Waterway in Delray Beach destroys standard aluminum window frames and hardware in as few as 3-5 years, and that corrosion directly undermines energy efficiency by breaking the perimeter seal. Once the frame weatherstripping and corner seals fail, air infiltration rises and the window’s insulating performance drops. We specify marine-grade finishes, PVC, or fiberglass frames for Delray Beach homes in the salt-exposure zone, and we quote those options side by side on paper so you see the tradeoff in writing. Call (561) 264-1337 for a free estimate, and we’ll assess your exposure based on distance from the water.
Almost never. The 1950s-1970s concrete block stucco homes concentrated west of Federal Highway in neighborhoods like Lake Ida have masonry rough openings that don’t conform to modern standard window dimensions. An off-the-shelf unit leaves gaps around the perimeter that get packed with shims and caulk, and that perimeter seal is where drafts, moisture, and energy loss start. In Delray Beach, custom-sized units are the norm, not the exception. We measure each opening and modify frames on-site for a true fit. Call (561) 264-1337 for a free measurement and written quote.
Replacement windows in Delray Beach require a Palm Beach County building permit when the openings change size or when impact-rated units are required, which applies to nearly all coastal-zone projects. If your home is in a certified historic district, the city’s preservation board reviews the application before the permit is issued. On tight lots where staging and access are constrained, the permit process can also involve coordination with neighbors for fence-line or shared-wall work. We pull permits, schedule inspections, and keep the site clean. We don’t ask the homeowner to manage any of it. Call (561) 264-1337 and we’ll tell you exactly what applies to your street.
Access drives cost, often more than the window itself. On a tight Delray Beach lot, such as a CBS home on a narrow Lake Ida street, there may be no side yard to stage materials or set up a cutting station. We stage on the driveway, keep the sidewalk clear, and carry materials through the house carefully. If a second-floor opening requires a ladder setup from a neighbor’s property or if parking is restricted during business hours, the labor estimate accounts for that. Recently, on a tight Lake Ida CBS home, we replaced original jalousie windows with custom low-E impact units, modified each frame on-site, and finished without disturbing neighbors. We quote access honestly before work starts. Call (561) 264-1337 for a free estimate that reflects your actual lot conditions.
Call TruePane Windows & Doors for Energy-Efficient Windows in Delray Beach
You’ve probably lived in your Delray Beach house for twenty years or more, and you intend to stay. You don’t need the cheapest bid. You need a company that will still answer the phone in thirty years. TruePane has served South Florida communities since 2008 through Dale Kessler’s craft tradition, and we stand behind every install with a Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, no arguing. A live person answers our phone 24 hours a day, 7 days a week. Call (561) 264-1337 for your free estimate. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, proudly serving Delray Beach and South Florida.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.