Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterViewLux Impact Windows & Doors in Boca Raton: What to Know First
We service and install ViewLux impact windows and doors throughout Boca Raton, honestly and without the runaround. Most ViewLux repair and replacement jobs we schedule within a week, and the work is done right the first visit or we return under the Done Right Promise. Call (561) 264-1337 and you’ll get a live person, not a voicemail tree.
This page is for homeowners in Boca Raton who already have ViewLux impact windows or doors, or who are weighing ViewLux against Andersen, Pella, PGT, or CGI and want straight answers before spending a dollar.
How ViewLux Products Fail - and How We Fix Them
- Rocker arm fatigue in ViewLux casement impact windows. We see this often in Boca Raton homes built in the mid-2000s. The zinc-plated rocker arm wears at the pivot bushing, the sash starts to sag, and the multipoint lock stops landing on the keeper. Most installers would sell you a new window. We replace the rocker arm assembly and re-shim the sash. Takes about forty minutes per unit.
- Roller drag on ViewLux 700 Series sliding glass doors. The original rollers are stainless steel but the axle hairpin clips corrode in salt-heavy air near the Intracoastal. The door gets heavy, then the panel comes off track. We swap in nylon-caged stainless rollers and clean the track channel with a degreaser that doesn’t soften the weatherstripping. Aftermarket rollers here are actually better than what the door shipped with.
- Compression gasket flattening on ViewLux fixed impact windows. Gulf-front and Intracoastal-facing houses run into this inside eight years. The gasket loses memory under UV load, and air finds its way in around the glass pack. ViewLux doesn’t sell the gasket as a standalone part, which surprises most owners. We match it through a commercial glazing supply house in West Palm Beach, cut it to length, and re-seat the glass with fresh setting blocks.
- Handle spring failure on ViewLux French impact doors. The interior actuator spring snaps, the handle flops, and the multi-point rods bind halfway. The lock still works, but the door won’t pull the weatherstripping tight, which defeats the impact rating. We carry replacement springs that fit the ViewLux hardware profile and will often have the door tightening up within an hour.
- Sill weep system blockages on ViewLux sliding doors. This one is sneaky. Fine sand and pollen from Royal Palm and Boca Teeca landscaping settle into the weep holes at the sill base. Water backs up inside the track and starts wicking into the floor plank under the door. We clear the weeps, flush the sill channels, and check the exterior sill pan flashing drops before we ever talk about sealing anything.
Our ViewLux Impact Windows & Doors Process
- 1
You call. A live person answers. We ask about the ViewLux product you have, what you’re noticing, and when it started. Then we schedule the visit in a window we’ll actually hit.
- 2
We inspect. Our technician checks the frame for square, the glass pack for seal movement, the hardware for wear, and the perimeter flashing for any water path. We photograph everything.
- 3
We make a parts call. Sometimes OEM makes sense. Sometimes a better aftermarket part exists, and we’ll tell you which and why. If we recommend aftermarket, it’s because it outlasts the original. Not because it’s cheaper for us.
- 4
We quote on paper. You get a written line-item quote before any work starts. No surprise line items. If the scope changes, we re-quote before we proceed.
- 5
We do the work. Square frames, clean sills, fasteners to spec. We test the operation, check the seal, and clean the job site like we found it.
- 6
We register your warranties. Both manufacturer warranty layers registered in writing before our truck leaves your driveway. That’s The Keystone Standard, and we’ve never skipped it.
What ViewLux Impact Windows & Doors Costs in Boca Raton
Here’s what we see on ViewLux work in Boca Raton right now. These are honest ranges, not bait numbers.
- ViewLux casement window rocker arm or hinge replacement: $185-$340 per window, parts included.
- ViewLux 700 Series sliding door roller replacement and track service: $260-$450 per panel.
- ViewLux French door handle spring and multi-point tune-up: $175-$310 per door.
- Full ViewLux impact window replacement (standard 36″ x 60″ opening): $1,850-$3,200 installed per window, depending on glass package and frame series.
- Full ViewLux impact sliding glass door replacement (72″ x 80″): $5,500-$9,800 installed, depending on panel count and sightline options.
What moves the price is glass package, frame condition, opening size, and whether we’re repairing hardware or replacing the entire unit. We will never push a replacement when a repair holds. Call (561) 264-1337 for a free estimate and we’ll put the number in writing.
Why Boca Raton Homeowners Call TruePane Windows & Doors for ViewLux Work
Plenty of window companies will take a look at a ViewLux door and quote you a full replacement just because they don’t stock the parts. We don’t operate that way. We’re an independent ViewLux service provider, and Dale Kessler grew up in Boca Teeca. He’s spent years setting and sealing windows in this town, through hurricane seasons that taught us what holds and what doesn’t.
If your ViewLux product has failed and the manufacturer warranty doesn’t cover it, we can often repair it for hundreds rather than thousands. And if the right call is replacement, we’ll quote Andersen, Pella, PGT, CGI, or another ViewLux unit side by side on paper so you see exactly what you’re buying and why. Every job gets our Done Right Promise. If the pane is not true, the job is not done, and we’ll be back to make it right.
FAQs
Yes. We’re an independent ViewLux service provider. That means we can repair and replace ViewLux products without being tied to a manufacturer’s sales quota or parts markup. We also carry aftermarket parts that sometimes outlast the originals, and we’ll tell you which is which before you pay a dime.
Not the way we do it. We use manufacturer-approved methods and parts where they’re available, and we document every repair. If a warranty claim needs to be filed, our paperwork supports it. We register both warranty layers in writing before the truck leaves your driveway, which is more than most installers will do.
Most hardware repairs are done in a single visit, often within two hours. Full replacement jobs typically run one to two days depending on how many openings we’re doing and whether the frames need any R&R. You’ll have a firm schedule before we start, and we’ll be there when we say.
If the frame is square and the glass pack is intact, repair usually wins. Hardware is replaceable, and a good roller or hinge job gives you another ten years. If the frame is twisted, the glass seal has failed, or the door no longer meets current Boca Raton wind code, replacement starts to make sense. We’ll show you both numbers on paper and let you decide. Call (561) 264-1337 for a free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boca Raton and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.