Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterViewLux Door Installation in Boca Raton: What to Know First
ViewLux door installation in Boca Raton is work we do regularly as an independent ViewLux service provider, and most single-door jobs are completed in one visit. Our pricing runs honest and upfront, typically between $380 and $1,200 for labor depending on the door type, with a written quote before any work begins. If you own a ViewLux entry door, French door, or folding door system that needs a proper installation or a re-set, this page tells you what actually matters here in Boca Raton’s salt air and hurricane season. Call (561) 264-1337 and a live person answers, day or night.
Key takeaways:
- We’re not ViewLux-authorized, but we’ve installed and serviced their doors across Boca Raton for years.
- Most ViewLux door installations are done in a single visit by background-checked, uniformed techs.
- Every job carries our Done Right Promise and The Keystone Standard, with both warranty layers registered in writing.
- Free estimates. No surprise line items. No second appointment left hanging.
How ViewLux Products Fail - and How We Fix Them
ViewLux makes a good door, but every product line has its habits, and in Boca Raton the climate accelerates certain failures. Here’s what we actually see:
- ViewLux 970 Series entry doors delaminating at the bottom rail. Salt-driven moisture wicks up through unsealed end cuts near the threshold, and the veneer lifts. The fix is not a patch. We remove the door, re-seal the end grain with a moisture-blocking treatment, reset the hinges, and re-hang it square. Patching over delamination just moves the problem up the door.
- ViewLux 850 Series French doors that bind in July. The composite stiles expand in Florida humidity, and if the original install didn’t leave proper side clearances, the active leaf catches the frame. We typically re-machine the edge clearance, replace the hinge shims, and re-align the astragal so both leaves operate with one hand even at 95 percent humidity.
- ViewLux folding door systems with sagging top-track rollers. Boca Raton homes with west-facing openings see this constantly. The heat breaks down the plastic roller carriers, especially on the wide-panel configurations, and the panels start to drag and jump. We replace the OEM carriers with either fresh ViewLux parts or a higher-cycle aftermarket equivalent, and we re-tension the track assembly so the stack folds without a fight.
- ViewLux storm door closers that snap off at the jamb bracket. The factory bracket is die-cast, and if the wind catches a storm door in one of Boca’s summer squalls, that bracket is the first thing to go. We install a heavier-wall bracket, re-hang the door so the reveal is even, and set the closer tension correctly so the door doesn’t slam against the jamb stop.
- ViewLux pivot doors with a dragging sweep. The tall pivot hardware goes out of vertical over time, and the bottom sweep starts scrubbing the floor. In the Watergate and Camino Gardens neighborhoods we see this on homes with marble or travertine entries where the slab has settled slightly. We reset the pivot bearing, re-shim the hinge block, and set the sweep to clear the floor by a consistent three-eighths inch, which is where a pivot door should ride.
We don’t guess at these systems and we don’t try to fix them through the peephole. We pull the door, diagnose it on sawhorses, and tell you plainly whether it needs a part or a proper re-installation.
Our ViewLux Door Installation Process
This is what a ViewLux door installation looks like when TruePane shows up at your Boca Raton home:
- 1
The call and the conversation. You call (561) 264-1337 and a live human answers. We ask what door you have, what it’s doing, and when you first noticed it. Then we book a time we’ll keep.
- 2
Opening it up. On site, we remove the door and inspect the frame, the rough opening, the hinges, the weatherstripping, and the threshold. We measure twice, always. One measurement goes in the book, one goes on the work order.
- 3
Parts decision on paper. If the job needs new hardware or a new slab, we show you OEM ViewLux versus quality aftermarket, side by side, with prices written down. You decide with the numbers in front of you.
- 4
The install. We set the frame or re-shim the existing one, hang the door, and dial in the reveals. If the pane is not true, the job is not done. That is the rule Dale Kessler keeps on the whiteboard, and it governs every ViewLux installation we do.
- 5
Sealing and testing. We seal the end grain, set the weatherstripping, adjust the sweep, then open and close the door a dozen times in front of you. We want you to see it work before we call it finished.
- 6
Cleanup and the warranty paperwork. We leave the doorway cleaner than we found it, and we hand you the warranty registration before the truck leaves the driveway. Both layers, written down, no fine print.
Most ViewLux door installations in Boca Raton are completed in a single visit.
What ViewLux Door Installation Costs in Boca Raton
Every door is different, but here’s the honest picture for ViewLux work in Boca Raton:
- Entry and swing doors: $380 to $850 for labor
- Double and French doors: $600 to $1,200 for labor, depending on whether both leaves need re-setting and how far the frame has moved
- Bifold and folding door systems: $700 to $1,500 for labor, influenced by panel count and roller replacement
- Pivot doors: $450 to $900 for labor, except when the pivot bearing itself needs replacement, which can push the total higher
- Storm doors: $250 to $450 for labor
What moves the price is straightforward: door type, panel count, whether the frame needs re-shimming or just re-hanging, and the parts decision between OEM ViewLux and quality aftermarket. We give you the number in writing before we touch the door, and the number doesn’t change once the job starts. Call (561) 264-1337 for an exact quote. Estimates are free.
Why Boca Raton Homeowners Call TruePane Windows & Doors for ViewLux Work
Our shop was founded by Dale Kessler, who grew up in the Boca Teeca neighborhood of Boca Raton and spent more than two decades setting and sealing windows and doors across Palm Beach County before starting TruePane in 2008. We’ve served local communities since 2008. A live person answers every call, 24 hours a day, 7 days a week. Not a phone tree.
Every ViewLux door installation we do carries the Done Right Promise backed by The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, workmanship guaranteed for 90 days with no paperwork fights and no arguing. If it isn’t done right, we come back and make it right.
And because we’re an authorized installer for more than a dozen manufacturer lines including Andersen, Pella, PGT, and CGI, if a ViewLux door reaches the point where replacement beats another repair, we can put a true side-by-side quote on paper so you see exactly what you’re buying.
FAQs
Yes. We install and service ViewLux doors as an independent provider, and if the door is under warranty we register both manufacturer warranty layers in writing so the coverage stays intact. We won’t void a warranty by cutting corners on the install.
Most ViewLux rollers, hinges, sweeps, and weatherstripping are available through our supply channels in South Florida, and when a part hits a lead-time snag we can usually offer a quality aftermarket equivalent so you’re not waiting weeks with a door that won’t close. We show you both options on paper before ordering anything.
If the frame is solid and the slab is structurally sound, a repair makes sense; ViewLux doors are worth keeping when they’re re-hung correctly. We’ll tell you straight if a door is past saving, and that conversation includes a written comparison to a new Andersen, Pella, PGT, or CGI door if you want to weigh the options.
Most single-door installs, including a re-frame or a re-hang with new hardware, take between two and four hours on site. Folding door systems and double French doors can take most of a day. We’ll give you an honest time window when you call, and we’ll be there when we say.
No. The number we hand you in writing before the work begins is the number you pay. We don’t pad the bill with surprise line items, and we don’t invent problems once the door is off the hinges.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boca Raton and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.