Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Therma-Tru Impact Garage Doors: The Boca Raton Owner’s Guide
Therma-Tru impact-rated garage doors in Boca Raton typically run between $4,800 and $9,200 installed, depending on door size, series, and whether we’re replacing the door alone or the full track-and-spring assembly. Most homeowners discover the failure the hard way: a door that racks sideways after a storm, a lower panel that’s delaminating from salt air, or a spring that lets go at 6 a.m. on a workday. We stock Therma-Tru-compatible doors and the common failure parts on our trucks, and we can usually complete a full door replacement in one visit.
If you’re reading this because your Therma-Tru door is binding, sagging, or showing panel separation at the bottom rail, we’ll walk you through identification, pricing, and what’s actually worth replacing versus repairing. And if you’re in Boca Teeca, Royal Palm Yacht & Country Club, or any neighborhood east of I-95, salt exposure is not a maybe, it’s a fact we plan for on every quote.
Which Therma-Tru Models This Applies To
Therma-Tru makes several impact-rated garage door lines, and the compatibility details matter more than most homeowners expect. The Pulse series and the Legacy impact line share hardware patterns with standard Therma-Tru doors, but the reinforced impact panels use a thicker skin gauge and a different hinge stack. If you order a door based on a guess, you end up with a panel that fits the opening and fights the track.
Here’s what to check before you call: look for the Therma-Tru data plate on the inside face of the door, usually near the bottom panel or on the left stile. It lists the series name, wind load rating, and a manufacturing date code. In Boca Raton, the date code matters more than it does inland, because doors installed before the 2007 Florida Building Code update often carry a wind rating that no longer matches what a re-roof or insurance inspection will accept today.
One compatibility gotcha we see regularly: Therma-Tru impact doors from the 2010-2014 manufacturing window used a proprietary corner bracket that’s since been discontinued. Aftermarket brackets exist, but they require shimming and re-tensioning. We carry both the OEM-equivalent and the quality aftermarket version, and we’ll show you the difference on paper before we touch the door.
For homeowners considering OEM versus aftermarket: Therma-Tru OEM parts carry the manufacturer’s warranty layer and exact panel match. Quality aftermarket equivalents, from suppliers we’ve vetted over decades, often cost 20-30% less and perform identically for non-cosmetic components like rollers, hinges, and struts. Dale Kessler has always told customers the same thing: spend OEM money where the panel shows, save aftermarket money where nobody can see it.
TruePane Windows & Doors is an independent service provider. We’re not a Therma-Tru dealer and we don’t pretend to be one. We stock Therma-Tru-compatible parts alongside PGT, CGI, and CWS lines because Boca Raton homes rarely have just one brand of impact opening, and showing up with options beats ordering and waiting.
Signs Your Therma-Tru Impact Garage Doors Is Failing
Impact doors fail slowly, then all at once. Here are the five symptoms we see most often in Boca Raton service calls:
- Door racks or binds halfway up the track. The panel has settled out of square, usually because a roller spindle wore unevenly or the bottom bracket shifted. In coastal air, the steel track brackets corrode faster than the aluminum panels, and the door starts fighting itself.
- Lower panel delamination or bubbling. Salt air gets behind the panel skin through a failed bottom seal, and the polyurethane core starts absorbing moisture. The panel face swells, the paint peels, and the door gets heavier. This is the most common reason we replace rather than repair.
- Spring snaps with a sound like a gunshot. Springs on Boca Raton doors carry extra tension to offset the added weight of impact-rated panels. When a spring lets go, the door becomes a dead load that can crush a person. Do not try to open the door manually after a spring failure.
- Wind whistles or daylight shows around the door edge. The weatherstrip and threshold have compressed or torn. Impact rating is only as good as the seal. A door that passes an inspection but leaks air is doing half its job.
- Opener strains or reverses mid-cycle. The door is heavier than it should be, usually from moisture in the panel core or a failing torsion spring. An opener that reverses isn’t broken, it’s telling you the door is out of balance.
Replacement Cost & What’s Included
For a single-car Therma-Tru impact door in Boca Raton, expect $4,800 to $6,500 installed. A two-car door runs $6,800 to $9,200. The spread comes down to three things: the wind load rating your opening requires, whether we’re replacing the track assembly or reusing it, and cosmetic panel finish.
Every TruePane quote for a Therma-Tru impact door includes: door removal and disposal, new track and hardware if needed, torsion spring balance, bottom seal replacement, opener re-set, and a written line-item breakdown. We register the manufacturer warranty on paper before our truck leaves your driveway, and we state the warranty duration in the contract. Our Done Right Promise covers the workmanship, no fine print, no arguing.
What drives cost up: openings built wider than standard, top-hinge reinforcement for a specific wind zone, and doors that need custom panel matching to an existing Therma-Tru style. What drives cost down: a clean standard opening, a simple one-for-one panel swap, and scheduling during our non-peak weeks.
DIY or Call Us?
You can safely check three things yourself: the data plate on the inside panel (to confirm series and date code), visible corrosion on track brackets, and condensation or staining at the bottom of the panels. Those three observations help us quote accurately over the phone.
What you should not attempt: spring replacement, cable re-threading, or panel removal. Torsion springs on Boca Raton impact doors are under enough tension to break bone. Cables that slip while the door is raised will drop 300 pounds faster than you can react. We carry the right winding bars, the right replacement springs, and years of scars from the wrong way to do it. Call (561) 264-1337 and let a background-checked, uniformed technician do the dangerous part.
FAQs
In Boca Raton’s salt air, a Therma-Tru impact door with proper seals and annual maintenance lasts 12 to 18 years before panel degradation sets in. Doors at the beachfront or on the Intracoastal side tend toward the shorter end. Call (561) 264-1337 if you need an honest assessment of what’s left on your door.
Yes, if the failure is isolated: one roller, one hinge, a bottom seal, a spring. No, if the lower panels show delamination or the door has racked hard enough to warp the track. We’ll tell you which camp you’re in before we quote anything. Estimates are free.
Most single-door replacements in Boca Raton are done in one visit, typically 4 to 6 hours including removal, new door install, spring balance, and opener re-set. Two-car doors sometimes run 6 to 8 hours. We book the full day so we never leave a job half-finished.
We stock common Therma-Tru compatible parts on our trucks: rollers, hinges, torsion springs, bottom seals, and track brackets. Full door panels are ordered to match your model and typically arrive in 5 to 10 business days. If we stock the part, you’ll know before we send a truck.
Contact TruePane Windows & Doors
If your Therma-Tru impact garage door is failing, call (561) 264-1337 for a free estimate. A live person answers, 24 hours a day, 7 days a week. We’ll measure twice, quote in written line items, and stand behind the work like a company that’s been serving Boca Raton since 2008 and plans to be here for thirty more. If it isn’t square and it isn’t sealed, it isn’t done.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boca Raton and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After