PGT Window Replacement Nationwide | TruePane Windows & Doors

PGT Window Replacement: The Boca Raton Owner’s Guide

If you own PGT windows in Boca Raton and a sash, seal, or hardware component has failed, we match and install the correct replacement part, and most swap-outs are completed in a single visit. Installed pricing for PGT window replacement in Boca Raton typically runs from $225 to $690 per window depending on whether we’re replacing hardware, a balance, a sash, or the glass unit itself. You’ll usually notice the failure the same way every Boca Raton homeowner does: a window that won’t stay up, a crank that spins without moving the sash, or condensation trapped between the panes that won’t wipe away. We stock common PGT hardware and balance parts on the truck, and we can source window-specific components directly from PGT’s Florida distribution network without the wait a big-box counter will quote you.

Call (561) 264-1337

TruePane Windows & Doors is an independent service provider, not affiliated with PGT. What that means for you is simple: we quote the part honestly, we install it square, and we register the warranty layers in writing before we leave your driveway.

Which PGT Models This Applies To

The PGT line most homeowners in Boca Raton have is the WinGuard impact series, followed by Spectrum, ClassicVue, and the newer EnergyVue line. Each series uses different balance systems and hardware profiles, and that’s where most mismatches happen. A WinGuard single-hung balance is not interchangeable with a Spectrum balance even when both windows measure the same. That’s the compatibility gotcha we see weekly: someone ordered a part by measurement alone and ended up with a balance that fits the track but not the sash shoe.

Here’s how to identify what you have before you pick up the phone. Open the sash and look at the top edge of the frame. PGT etches the series name and a manufacturing date code there, usually in the corner. Keep that visible when you call us. The label tells us the series, the glass package, and the production date, which matters more than people think because PGT changed hardware suppliers twice in the last decade. A 2014 WinGuard uses a different pivot bar than a 2021 WinGuard, even though the windows look identical from the street.

On the OEM-versus-aftermarket question: for PGT specifically, we default to OEM hardware and balances whenever they’re available. PGT’s parts are engineered for Florida’s heat and salt air, and aftermarket “universal” balances wear out noticeably faster in coastal conditions. On glass units, we work with a Florida glass fabricator that meets PGT’s impact specs, because shipping a full PGT impact unit for a 20-year-old window isn’t always production-feasible, and the replacement has to meet the same wind-load and missile-impact rating the original carried. We’ll show you both options on paper before we order anything.

Signs Your PGT Window Replacement Is Failing

• The sash won’t stay up. On single-hung and double-hung PGT windows, this is almost always a balance failure. Florida’s humidity eats the internal spring or the coil, and once the tension goes, the sash drops. If you’ve been propping the window with a stick, the balance is done.
• The crank turns but the sash barely moves. On casement and awning windows, a stripped operator gear is the usual culprit. The crank handle spins because the gear teeth have worn smooth. We’ve seen operators fail in as few as seven years on west-facing Boca Raton homes where the afternoon sun bakes the mechanism.
• Fog or condensation between the glass panes. That means the seal has failed and the argon or krypton fill has escaped. You can’t wipe it away because it’s inside the unit. The glass pack replacement is the fix. This is the single most common PGT window repair in Boca Raton, and it’s almost never worth patching.
• The lock feels loose or won’t engage. A PGT lock that rattles is letting air and water past the weatherstripping, but the real issue is usually the keeper alignment. Years of opening and closing shift the sash, and once the keeper is out of true, the lock doesn’t pull the sash tight. That gap is also how you lose air conditioning in July.
• Water stains or softness on the interior sill or drywall below the window. This is the one people ignore the longest. Water finding its way past a failed seal or a warped frame will show up as bubbling paint or a soft sill. By the time you see the stain, the window replacement is the smaller job; the frame carpentry is the bigger one.

Replacement Cost & What’s Included

Here’s the honest math for PGT window replacement in Boca Raton. Hardware-only repairs (locks, keepers, crank operators) run $225 to $380 installed. Balance replacements run $280 to $460 per sash depending on the series. Full glass-pack or sash replacements run $420 to $690 per unit when we’re matching an existing PGT frame. The range depends on the size of the unit, whether it’s a two-person lift due to impact weight, and whether we’re sourcing OEM PGT hardware or a Florida-fabricated equivalent glass pack.

Every quote is a written line-item price. You see the part cost, the labor, and the warranty terms before we start. There are no surprise additions on the bill. The workmanship is covered by our Done Right Promise, and both warranty layers, manufacturer and ours, are registered in writing before the truck leaves your driveway. That’s The Keystone Standard on every PGT job we touch.

We also want you to know the standing offers that apply whether it’s a PGT balance or a full sash swap: a free written repair estimate, and a permanent 5% discount for seniors and veterans.

DIY or Call Us?

There are things a homeowner in Boca Raton can safely do before calling anyone. You can check the PGT label on the sash to identify the series. You can note whether the window is single-hung or casement, and whether one sash or both are affected. You can confirm whether condensation is on the outside of the glass (morning humidity, nothing wrong) or trapped between the panes (seal failure, we need to see it). That information saves us a diagnostic trip and gets your quote faster.

Where DIY goes wrong on PGT windows is the balances and the glass. Impact-rated sashes are heavy, sometimes over 80 pounds, and a balance under tension can snap a finger or take out the frame if released wrong. And a PGT impact window that’s re-glazed with the wrong laminate or the wrong spacer loses its wind-load rating without ever looking different from the inside. That’s not a fine-print issue; that’s the difference between a window that holds in a storm and one that doesn’t. If you’re not certain, call us at (561) 264-1337 and we’ll walk you through it honestly. We’d rather tell you it’s simple than sell you something you don’t need.

FAQs