Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Impact Windows in Boca Raton: What to Know First
Independent Mr-Glass impact window service in Boca Raton typically runs $185 to $640 for most repairs, and full replacement work is quoted line by line before any commitment. TruePane Windows & Doors is not a Mr-Glass dealer and we’re not affiliated with the manufacturer, but we service Mr-Glass impact windows throughout Boca Raton as an independent Mr-Glass service provider, and we stock or source the parts these units actually need. Most repairs are completed the same day we arrive, and every job leaves with both warranty layers registered in writing. If you own a Mr-Glass impact window that’s fogged, binding, whistling, or refusing to lock, call (561) 264-1337 and a person will answer.
How Mr-Glass Products Fail, and How We Fix Them
- Fogged glass on Mr-Glass impact insulated units: We see this most often on Mr-Glass 8000-series horizontal sliders and single-hung units in Boca Raton. The desiccant in the spacer fails, moisture gets in between the panes, and once that starts the only real fix is replacement glass. We measure the opening, order the correct impact-rated insulated glass unit, and set it square so the seal doesn’t fight the frame.
- Binding and dragging tracks on Mr-Glass sliders: Boca Raton’s sandy soil works its way into roller assemblies faster than people expect. Mr-Glass horizontal sliders in neighborhoods like Boca Teeca and Woodfield Hunt Club tend to collect grit in the bottom track, and the rollers wear unevenly. We pull the sash, clean the track, replace the rollers with stainless-steel aftermarket components when the OEM parts are backordered, and set the sash so it glides without leaning.
- Impact frame seal failure on Mr-Glass casement windows: The compression gaskets on Mr-Glass casement sashes dry out and shrink under South Florida sun exposure. When the gasket fails, the window still closes but it doesn’t seal, and air and moisture push through. We replace the gasket with a silicone or EPDM profile that matches the extrusion and holds up longer than the original in salt air.
- Locking hardware wear on Mr-Glass single-hung impact windows: The lock and tilt latch mechanisms on older Mr-Glass single-hungs use a zinc alloy that fatigues over time. Homeowners report the window locks but the sash still rattles in high wind. We replace the hardware, and where the original geometry allows we upgrade to a multipoint lock that actually anchors the sashes together.
- Failed argon fill and internal condensation in Mr-Glass picture windows: On fixed impact units especially, the original gas fill migrates out through the perimeter seal, and the first sign is condensation that doesn’t wipe off. The glass is not repairable, only replaceable, and it’s a warranty-sensitive job. TruePane documents the unit’s manufacture date, confirms the seal failure, and files replacement glass paperwork in a way that preserves whichever warranty layer still exists.
Our Mr-Glass Impact Windows Process
Here’s how a Mr-Glass job runs from first call to cleanup.
- 1
Call and describe the issue. A live person answers. We ask the right questions: when the window fails, what it sounds like, what it looks like from inside and out.
- 2
We inspect the unit on site. A background-checked, uniformed technician measures every opening twice, checks the frame for square, and documents what’s failing before touching anything.
- 3
We quote parts and labor on paper, side by side. If the unit can be repaired with OEM Mr-Glass parts, we price those. If the part is discontinued or backordered with no delivery date, we show you the aftermarket equivalent, its warranty, and what the trade-off is. You decide with the numbers in front of you.
- 4
We do the work. Glass, track, gasket, or hardware, the repair happens in one appointment most of the time. No second visit left hanging, no surprise line items on the bill.
- 5
We test the window in front of you. Lock and unlock, open and close, check the drain holes, confirm the sash sits square in the frame. If the pane is not true, the job is not done.
- 6
We register the warranties and hand you the paperwork. Both layers, in writing, durations stated, before the truck leaves the driveway. Then we clean up and go.
What Mr-Glass Impact Windows Cost in Boca Raton
Repair pricing depends on the failure and the sash size. Fogged glass replacement on a Mr-Glass impact unit in Boca Raton runs $260 to $580 per sash depending on dimensions and glass type. Roller replacement on a horizontal slider runs $185 to $340. Gasket replacement on a casement runs $150 to $290. Lock and latch hardware runs $110 to $260. Full replacement windows are priced per opening, and the material choice drives most of the cost: a standard Mr-Glass impact single-hung replacement runs $900 to $1,500 installed, while larger sliders or picture windows in openings over 60 inches wide run higher. Anything with a custom glass package or a multi-point lock upgrade moves the price up. We quote exactly what we’re going to do, and the senior and veteran discount of 5% applies across the board. Call (561) 264-1337 for a free estimate with all the numbers on paper.
Why Boca Raton Homeowners Call TruePane Windows & Doors for Mr-Glass Work
Most window companies in Boca Raton will sell you a replacement before they’ll tell you what’s actually wrong with the one you have. We take the other road. TruePane has been doing this work since Dale Kessler founded the company out of a frustration with out-of-true installs and warranty paperwork that went nowhere. We’re an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, PGT, CGI, and ES Windows, so when a Mr-Glass unit genuinely has no repair path left, we can quote you a replacement across multiple brands without pushing one over another. The Done Right Promise covers every job, and the phone is answered by a person around the clock. We’re in this for the long run, the same way Dale grew up watching his father replace jalousie windows all over Boca Teeca, never once calling it a hobby.
FAQs
No. We service and repair Mr-Glass impact windows as an independent Mr-Glass service provider. We are not a Mr-Glass dealer, and we don’t claim their authorization. That independence means we’re free to tell you when a repair is smarter than a replacement, and when a different manufacturer’s glass package would serve the opening better.
Yes, for most current Mr-Glass lines still in production, but it can take longer than anyone likes, because the lead time is set by the OEM. When a Mr-Glass part is discontinued or backordered with no date, we source quality aftermarket equivalents and put the comparison on paper with its own warranty, so you’re never stuck waiting on a part that isn’t coming. Call (561) 264-1337 and we’ll check availability for your specific Mr-Glass series.
It can, if the work is done wrong, but it won’t if the work is documented correctly. We’ve seen warranties voided because a previous contractor installed non-impact glass into an impact-rated Mr-Glass frame, or replaced a gasket without preserving the original warranty registration. TruePane registers both warranty layers in writing and confirms the unit’s manufacture date before we touch the glass, so the existing coverage remains intact where it actually exists.
For most roller, track, gasket, and hardware repairs, we finish the same day we arrive and the window operates before we leave. Glass replacement depends on how quickly the correct impact-rated insulated unit arrives from the supplier, and we tell you the real lead time before ordering anything.
Replace it when the frame is out of square, the glass package is failed in multiple places, or the cost of repair approaches sixty percent of the cost of a new unit. In those cases we’ll quote a repair number and a replacement number on the same page, side by side, so you don’t have to guess. Call (561) 264-1337 and we’ll walk through both options free.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boca Raton and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After