Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMarvin Impact Windows & Doors in Boca Raton: What to Know First
We service and replace Marvin impact windows and doors throughout Boca Raton as an independent Marvin service provider, with most repair visits completed in a single trip and most full replacements quoted within a few business days. A typical Marvin impact window repair in Boca Raton runs between $185 and $480 depending on the failure, while full replacement jobs usually land between $1,100 and $2,800 per opening including the frame, glass, and labor. If you own a Marvin product and something isn’t latching, sealing, or sliding the way it should, this page tells you what’s actually going on and what it costs to fix. Call (561) 264-1337 and you’ll get a live person who can schedule a real diagnostic visit, not a callback request.
This page is written for Marvin owners in Boca Raton who’ve lived in their homes long enough to know that a window that doesn’t close tightly in August is a problem you’ll still be fighting in October. We’re TruePane Windows & Doors, and we’ve been setting glass in Palm Beach County since 2008.
How Marvin Products Fail - and How We Fix Them
- Ultrex fiberglass frame swelling on south-facing Signature Series windows. Boca Raton’s afternoon sun beats on south and west elevations for hours, and we regularly see Marvin Signature Series frames warp just enough to make the sash bind in the track. The fix isn’t always a new window, often it’s a realignment and re-bedding of the frame, but if the fiberglass has delaminated we’ll say so plainly and quote a replacement rather than patching something that won’t hold through hurricane season.
- Failed glazing seals on Marvin Elevate casement and picture windows. Fogging between the panes is the most common Marvin-specific complaint we get in Boca Raton, and it’s almost always a broken IG (insulated glass) seal. Marvin’s own documentation is quiet about seal life in salt air, but our experience is that homes within two miles of the Intracoastal lose seals faster than inland properties. We replace the glass unit with an impact-rated IG that matches the original spec, and we re-register the warranty before we leave the driveway.
- Weeping sill clogs on Marvin Ultimate double-hung windows. Marvin’s Ultimate line uses a sloped sill with weep holes that drain water out and away from the frame. In Boca Raton, landscaping debris and wind-driven salt spray clog those weep holes faster than most owners expect, and the first symptom is water pooling on the interior stool after a hard rain. We clear the weeps, check the sill flashing for corrosion, and replace any drain components that have become brittle in the sun.
- Roller wear on Marvin Signature sliding patio doors. Boca Raton homeowners use their sliders eleven months a year, and Marvin’s Signature multi-slide and lift-and-slide doors carry a lot of glass weight on roller assemblies that are, frankly, undersized for that duty cycle. When a door starts grinding or hesitating, the rollers are flattened, not just dirty. We replace them with aftermarket stainless rollers when Marvin’s OEM spec is backordered, which is common during summer storm season, and we always note the substitution on the invoice so future service isn’t a guessing game.
- Lock and latch misalignment on Marvin Clad Ultimate French doors. The classic Marvin French door problem in Boca Raton is the inactive leaf drifting out of square because the frame relies on two small astragal bolts that loosen over time. The symptom is a handle that turns halfway and sticks, or a deadbolt that barely engages. We re-square the frame, replace the astragal hardware if it’s stripped, and recheck the reveal around both leaves until it measures the same at top, middle, and bottom.
Our Marvin Impact Windows & Doors Process
- 1
Call and a live person answers. You call (561) 264-1337, tell us what the opening is doing, and we book a diagnostic visit that fits your schedule. No voicemail tree, no regional call center.
- 2
We measure twice, then we diagnose. A uniformed, background-checked technician arrives with the right tools for a Marvin-specific diagnostic: reveal gauges, deflection readings, and a close look at the glazing bead, roll hardness, and sill drainage. Dale Kessler’s standing rule applies: if it isn’t square and it isn’t sealed, it isn’t done.
- 3
We put parts and options on paper. We quote OEM Marvin parts or quality aftermarket substitutes side by side, with lead times and total cost written out. You see exactly what you’re buying before we touch anything.
- 4
We do the work right, not fast. Whether it’s a glass replacement, frame repair, or full window or door swap, we set it square, seal it clean, and clean the sill. Most repairs finish the same day. Full replacements run one to two days per opening depending on what’s behind the old frame.
- 5
We test it in front of you. Locks and latches are operated ten times. The reveal is checked top, middle, bottom. The door opens and closes one-handed. You don’t sign off until it passes our check first.
- 6
We register both warranty layers, in writing, before we leave. The Keystone Standard means you get manufacturer warranty durations stated on paper and our Done Right Promise on the workmanship. If it isn’t done right, we make it right. No paperwork fight, no fine print.
What Marvin Impact Windows & Doors Costs in Boca Raton
Here are the numbers we routinely quote on Marvin work in Boca Raton. These are honest ranges based on job conditions, not teaser rates designed to get a technician in the door.
- Impact-rated insulated glass unit replacement (single Marvin Elevate or Signature window): $350 - $780
- Weep system clean-out and drain flush (per window): $85 - $150
- Roller and track rebuild on a Marvin Signature slider: $220 - $475
- French door re-square with new astragal hardware: $275 - $540
- Full Marvin impact window replacement (frame, glass, installation, per opening): $1,100 - $2,800
- Full Marvin impact sliding door replacement: $3,400 - $7,200
What moves the price is access, the age of the home, and what’s hiding behind the old frame. A 1970s Boca Raton ranch with wood bucks and stucco over masonry is a different job than a 2010s hoem in Woodfield Country Club. We’ll tell you which situation you have, and what it costs, before we start. Call (561) 264-1337 for a free estimate.
Why Boca Raton Homeowners Call TruePane Windows & Doors for Marvin Work
We started TruePane in 2008 because Dale Kessler, our owner, grew up in the Boca Teeca neighborhood watching his father replace jalousie windows on every house on the block, and he watched too many homeowners get handed a low bid and a loose frame. More than four decades later, we still treat a Marvin install the way a glazier treats a pane: if it isn’t true, it isn’t done. We register both warranty layers before the truck leaves your driveway, we guarantee the workmanship for 90 days with no arguing, and we answer the phone 24/7 with a live person. When a Marvin part is backordered and hurricane season is six weeks away, we can also quote you across our full line card, including Andersen, Pella, and PGT, so you’re never stuck waiting on one manufacturer. That’s the kind of flexibility that matters when your east-facing slider needs glass in July.
FAQs
No. As an independent Marvin service provider, we are not authorized by Marvin, but our repairs and replacements do not void your existing coverage because we document every job, use OEM or equivalent-spec parts, and do not modify the frame or glass in ways that fall outside the manufacturer’s warranty terms. We register both warranty layers in writing before we leave, so if anything is covered later, you have the paperwork to prove it.
For common items like rollers, locks, and weep covers, most parts arrive in three to five business days. Impact-rated glass units take longer, typically two to four weeks because they’re made to order. If a Marvin part is backordered, we’ll show you a quality aftermarket option on paper with the trade-offs spelled out, then let you choose. Call (561) 264-1337 and we’ll check real-time availability while you’re on the phone.
If the frame is still square, the glass is intact, and the failure is a seal, roller, or hardware issue, repair usually makes sense and costs a fraction of replacement. If the frame has delaminated, the glazing is cracked, or the original install was never flashed correctly, replacement is the better call, and we’ll say so plainly either way. We’ll never sell you a new window when a $120 hardware kit fixes the problem.
Yes. When a Marvin impact window or door is being replaced and the job requires a permit in Boca Raton, we pull the permit, schedule the inspection, and stay on the job until it passes. If you’re replacing one opening and it turns into a wind mitigation question, we’ll tell you whether an upgrade makes sense for your insurance credit before you spend a dollar.
Impact-rated glass is tested and labeled to a specific Miami-Dade or Florida Building Code missile standard, and it’s what your insurance company wants to see on the paperwork. Impact-resistant glass is a looser term that doesn’t carry the same testing level. On a Marvin product in Boca Raton, we always quote the tested, labeled option because that’s what actually protects the opening and what the inspector will look for. Call (561) 264-1337 if you have an older Marvin window and want to know which one you’re looking at.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boca Raton and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.