Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterECO Window Systems Window Installation: The Boca Raton Owner’s Guide
If you have a failing ECO Window Systems window or door part in Boca Raton, we can source and install the correct replacement, typically within one visit. Installed pricing for most ECO Window Systems window repairs and component replacements runs $240-$680, depending on the part, the series, and whether the frame needs re-sealing. The most common way homeowners discover a problem is a window that suddenly won’t stay open, a sash that binds mid-track, or a seal that’s turned milky after a hard South Florida summer.
TruePane Windows & Doors is an independent service provider, not affiliated with ECO Window Systems. We work on these windows because we’ve seen enough of them across Palm Beach County to know exactly what fails, what’s worth repairing, and what’s better replaced outright.
Which ECO Window Systems Models This Applies To
ECO Window Systems produces aluminum impact-rated and non-impact windows and doors for the Florida market, and most of what we see in Boca Raton falls into their single-hung, horizontal roller, and fixed-picture lines. The critical compatibility gotcha with ECO is balance and roller sizing: their single-hung balances are not universal. A window from one production year may use a 1/2-inch spiral balance while a newer run uses a 5/8-inch block-and-tackle system. Read the label etched on the spacer bar or the sticker on the master frame to get the series code before you order anything.
For most homeowners, OEM ECO parts are the right call when the window is under ten years old. After that, quality aftermarket balances, rollers, and weatherstripping from the manufacturers we work with often outlast the original components at a better price. We’ll show you the difference on paper, side by side, so you’re not guessing.
Signs Your ECO Window Systems Window Installation Is Failing
- The sash drops when you let go. A worn spiral balance loses tension. On ECO single-hungs in coastal Boca Raton, salt air accelerates this on the balance tube threads, sometimes in as little as five years.
- The window sticks or jumps mid-track. Roller bearings flatten over time, especially on wider horizontal sliders. You’ll feel a sudden grab, then a skip. The roller wheel has likely developed a flat spot and is grinding on the rail.
- Condensation between the glass panes. The insulating glass unit seal has failed. ECO units, like most Florida impact windows, carry longer seal warranties, but heat and humidity cycles in Boca Raton eventually separate the seal from the spacer.
- Water staining on the interior sill or drywall below. This usually means the sill flashing or exterior sealant has separated. The window itself may be fine, but the installation is now leaking, and no new sash will fix that.
- You can hear road noise more clearly than before. Weatherstripping on ECO windows compresses with age, especially on the meeting rail of sliders. A gap the width of a quarter lets in more than sound; it lets in humid air that makes the room feel ten degrees warmer.
Replacement Cost & What’s Included
Here’s what we quote in Boca Raton, and what goes into each number.
- Spiral balance replacement: $240-$380 per window installed. Includes both balances for one sash, removal of the old units, and testing of the sash travel.
- Roller replacement for horizontals: $180-$320 per panel installed. Includes the roller housings, cleaning the track, and adjusting the reveal.
- Insulating glass unit replacement: $340-$680 per sash installed, depending on size and whether the glass is impact-rated or standard laminated. This includes removing the glazing bead, setting the new IGU, and re-sealing the frame.
- Full window re-sealing (exterior): $280-$520 per opening. Includes removal of old sealant, backer rod where needed, and a marine-grade sealant applied in a single continuous bead.
The range depends on how far the corrosion has traveled. A balance swap on a well-kept window stays on the low end. A roller replacement where the track is pitted from salt and debris will need more work. Every quote is line-itemed before we start, and the number we write down is the number you pay. No change orders, no surprise line items.
Every part we install carries both the manufacturer’s warranty and our Done Right Promise, with both warranty layers registered in writing before the truck leaves your driveway. If something isn’t right inside those ninety days, we come back and make it right. No paperwork fights, no arguing.
DIY or Call Us?
You can safely do a few things yourself. Clean the track with a dry brush and inspect the sash for obvious visible damage. Take a photo of the label on the spacer bar or frame, because that serial and series code saves us a trip if you decide to call. That’s where DIY should end.
What you should not attempt is removing a sash from a window that’s been sitting in a coastal environment for five or more years. The balance tubes on ECO single-hungs are under significant tension, and a corroded pivot shoe can release unexpectedly. We’ve had homeowners in East Boca call us after a sash came down on their hand during a “quick fix.” Glazing work also involves handling glass units that weigh forty pounds or more inside a frame that’s not forgiving. Let a trained technician do the removal, the replacement, and the re-sealing. If you’ve got the part number and want an honest read on whether it’s worth repairing or replacing, call (561) 264-1337 and we’ll talk it through with you.
FAQs
In our experience, ECO balances and rollers last seven to twelve years in Boca Raton’s coastal climate, while insulating glass units typically hold their seal for ten to twenty years depending on exposure. Homes within a mile of the Intracoastal see faster degradation on metal components because of salt air. Call (561) 264-1337 if you want us to assess what’s wearing on your specific windows.
A balance or roller can often be replaced with a matching component, which is effectively the repair. A failed insulated glass seal cannot be repaired; the glass unit itself must be swapped out. We’ll tell you straight which route makes sense once we see the window.
Most ECO Window Systems balance, roller, or IGU replacements take one to two hours per opening once we’re on site. If multiple windows need work, we schedule accordingly and most jobs are completed in a single visit. Call (561) 264-1337 for a free estimate.
We carry the most common ECO single-hung balances, horizontal rollers, and weatherstripping profiles on our service vehicles, along with parts for Andersen, Pella lines. If your specific series needs a factory-order component, we’ll have it sourced and scheduled within days, not weeks.
If you’re tired of looking at a window that won’t stay up or a track that fights you every morning, call (561) 264-1337 and ask for a free estimate. We’ll come out, take the measurements, and tell you exactly what it costs to have it done right.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boca Raton and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.