Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CWS Roof Repair in Boca Raton: What to Know First
Independent CWS roof repair in Boca Raton typically runs $350 to $1,900 depending on whether you’re sealing a single skylight frame or replacing a ridge vent assembly that’s been leaking through the decking, and most jobs are completed within three to five business days. We’re not the cheapest bid on the block, and we don’t try to be. We quote the actual fix, use parts that last, and stand behind the work in writing with our Done Right Promise.
This page is for homeowners in Boca Raton who own a CWS roof product and have already discovered that the manufacturer’s website doesn’t tell them what’s actually failing, why it failed, or what a real repair should cost. If that’s you, call (561) 264-1337 and you’ll get a live person who can talk specifics, not a voicemail tree.
How CWS Products Fail and How We Fix Them
- CWS standing seam panels with broken clip fasteners. This is the most common CWS roof failure we see in Boca Raton, and it’s almost always on homes built between 1998 and 2006. The original panel clips fatigue from thermal expansion cycling, the seam lifts by an eighth of an inch, and wind-driven rain from a summer squall gets behind the panel. The fix is replacing the failed clips with a heavier-gauge aftermarket clip rated for coastal wind zones, then re-seaming the panel. We use aftermarket clips from S-5! or a comparable rated source, not OEM clips that fail the same way in another eight years.
- CWS ridge vent flashing separation at the gable ends. On CWS metal roof systems, the ridge vent end caps are sealed with butyl tape at the factory, and that tape hardens in the Florida sun. By year twelve or so it’s powder, and water wicks under the cap every time the wind blows out of the east. The repair is mechanical: we pull the cap, clean the seam, and reset it with a polyurethane sealant that stays elastic. OEM doesn’t sell the butyl tape separately, which is why so many Boca Raton owners get told they need a new ridge line when they just need a better sealant.
- CWS skylight curb leaks on flat-roof sections. We see this on CWS aluminum skylight curbs over flat or low-slope roof sections, common in the Boca Teeca and Royal Palm Yacht & Country Club neighborhoods. The curb flashing lifts at the corners because the original installer used roofing mastic instead of a proper two-part flashing system. We strip the old mastic, check the curb for corrosion, and re-flash with peel-and-stick underlayment lapped onto the curb. This is a two-hour repair, not a skylight replacement, and we’ll tell you that honestly.
- CWS gutter apron missing on the eave line. A surprising number of CWS roofs in Boca Raton were installed without a gutter apron, especially on custom homes where the fascia detail hid the gap. Without the apron, water wicks back under the drip edge and rots the fascia board over ten to fifteen years. The fix is pulling the first course, installing a proper aluminum gutter apron, and resetting the panels. It’s tedious work that most roofing crews skip because it doesn’t show from the ground. We do it because the rot doesn’t stop on its own.
- CWS panel end lap fasteners backing out. On longer roof slopes, CWS panels lap end-to-end, and the lap fasteners are the weak point in a hurricane. After a few seasons of expansion and contraction, the fasteners back out slightly, and the lap opens just enough for capillary action to draw water uphill. The fix is removing the loose fasteners, inspecting the holes for corrosion, and resetting the lap with a larger-diameter fastener plus a butyl-backed washer. If the hole is wallowed out, we’ll add a blind rivet beside it and seal the old hole.
Our CWS Roof Repair Process
- 1
Call and talk to a person. Call (561) 264-1337. A live person answers, 24 hours a day. We’ll ask what’s leaking, how long it’s been happening, and whether you’ve had anyone look at it before.
- 2
We inspect the failure, not just the symptom. Our technician gets on the roof, finds the actual point of water entry, and documents it with photos. On a CWS job, we’re looking specifically at panel clips, lap fasteners, ridge caps, and the skylight curb area. No charge for the diagnostic when the repair follows.
- 3
We put the parts decision on paper. Where OEM parts are the right call, we use OEM. Where OEM parts are known to fail short or aren’t sold separately, we use a heavier-gauge aftermarket alternative and explain exactly why. You see the two options side by side before anything gets ordered.
- 4
The repair is done by a uniformed, background-checked technician. At minimum, the repair gets a water test with a hose at full pressure, not just a visual once-over. On the roof we’re checking lap seams, fasteners, and the seal around the repair while the test runs.
- 5
We register the warranty layers in writing. We give you the repair warranty, the parts warranty, and the workmanship guarantee on paper before we leave the driveway. If something’s not right, we fix it under our Done Right Promise. No paperwork fights.
- 6
We leave the roof cleaner than we found it. Debris bagged, gutter guards checked, and a note left on any other CWS issues we saw that aren’t urgent yet. We’d rather tell you now than surprise you in August.
What CWS Roof Repair Costs in Boca Raton
CWS roof repair pricing depends on what’s failed, how accessible it is, and whether the panel needs re-seaming or full hardware replacement. These are the ranges we quote most often in Boca Raton:
- Single panel clip replacement at the ridge: $350 to $650. Two or three clips in the same seam: $550 to $950.
- Ridge vent end cap re-seal, one gable end: $400 to $700. Both ends: $700 to $1,100.
- Skylight curb re-flash and re-seal: $750 to $1,100. Corroded curb replacement: $1,300 to $1,600.
- Gutter apron installation along a 30-foot eave line: $900 to $1,200, including panel reset.
- Lap fastener reset, per seam: $300 to $550, depending on decking access and corrosion.
What moves the price in Boca Raton specifically is roof height and pitch. On a three-story Intracoastal home with a 7:12 pitch, the same lap fastener job costs more than it does on a single-story ranch in Woodfield Country Club because of hoisting, tie-offs, and safety setup. That’s the honest answer: labor safety requirements, not parts, are the swing factor. Call (561) 264-1337 for a free estimate and we’ll give you a written line-item quote, no change orders and no surprises later.
Why Boca Raton Homeowners Call TruePane Windows & Doors for CWS Work
Dale Kessler grew up in Boca Teeca and started TruePane because he spent two decades watching homeowners get handed a low bid and a loose frame. For a CWS roof repair, the attitude matters. We don’t sell quick patches. We don’t paint over a wet spot and call it a day. Every CWS repair is done by a technician who measures, tests, and re-tests before calling the job finished. If the pane isn’t true, the job isn’t done.
We also service PGT, CGI, ES Windows, and ECO Window Systems products in Boca Raton, which helps when a home has a mix of CWS skylights and another manufacturer’s impact windows above the roof line. Instead of calling two companies, you get one crew that understands the entire roof-to-wall connection. Our work is backed by the Done Right Promise and The Keystone Standard: warranty layers registered in writing, durations stated, before we leave the driveway. We’ve served Palm Beach County since 2008 through a heritage of craft and community commitment, and we’ll be here in thirty years to stand behind what we did today.
FAQs
No. As an independent CWS service provider, we perform repairs that don’t void the existing manufacturer warranty because we don’t alter the structural panel, the original underlayment bond, or the manufacturer-installed flashing system. Where a repair might touch a warrantied component, we tell you before the work starts and give you the option to file a claim with CWS first. We’ll even document the failure with photos so you have a clean case.
Sometimes, but not always. CWS doesn’t sell many repair components individually, especially older panel clips and ridge cap butyl tape. When OEM parts are available and priced reasonably, we use them. When OEM parts are discontinued or known to fail short in Florida heat, we recommend an aftermarket alternative that’s heavier-duty. You’ll see the options on paper and decide. Call (561) 264-1337 if you want to know whether your specific CWS part is still available before you commit to a contractor.
Repair is worth it if the decking is dry, the panel coating is intact, and the failure is isolated to a clip, a lap, a seal, or a cap. Replacement is worth considering only when there’s widespread panel corrosion, rotted decking in multiple bays, or more than a third of the seam clips showing fatigue. For most CWS roofs in Boca Raton that are under fifteen years old, the right call is a repair that stops the leak and a maintenance plan that catches the next clip failure before it opens up. Call (561) 264-1337 and we’ll tell you straight which side of the line you’re on.
For an active leak, we can typically be on-site within 24 to 48 hours, and we prioritize roof leaks during the rainy season because water in the decking turns a $500 clip repair into a $15,000 redeck in a matter of weeks. A live person answers the phone 24/7, so call (561) 264-1337 and we’ll schedule the diagnostic while you’re still on the line. If water is coming through the ceiling, kill the power to the light fixtures below first and move what you can. We’ll handle the rest.
No. That’s the point of putting the parts decision and the scope on paper before anything gets touched. We give fixed pricing with no change orders unless you ask us to do something different than what we quoted. If we open a panel and find hidden rot that changes the scope, we don’t proceed until you’ve seen the photos and approved the updated quote. It’s a square deal, which is how it should always work in Boca Raton.
If your CWS roof is leaking, call (561) 264-1337 today. We’ll give you a straight answer, a written estimate, and a repair that holds through hurricane season. A live person answers, 24 hours a day.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boca Raton and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After