CGI Window Installation Nationwide | TruePane Windows & Doors

CGI Window Installation: The Boca Raton Owner’s Guide

CGI window installation in Boca Raton typically runs $185 to $420 per window for labor when a homeowner already has the sash, frame, or hardware component on hand, and $1,100 to $2,800 per opening when the full window unit needs to be pulled and reset. We stock common CGI-compatible hardware on the truck and can match most parts to your model line the same day, often during the first visit. The way most homeowners discover a problem is gradual: a sash that scrapes when it opens, a crank that turns without moving the panel, or a weep hole that won’t drain after a hard rain. By the time you’re searching for installation help, the part has usually been failing for months.

Call (561) 264-1337

We are an independent service provider, not affiliated with CGI, which means we source parts without a sales quota attached and install them to the manufacturer’s written spec, not to whatever gets the job done fastest.

Which CGI Models This Applies To

CGI’s window lines that we service most often in Boca Raton include the Estate Collection, the Targa series, and the Classic and Sentry lines, though the installation principles hold across their impact-rated catalog. The part that matters isn’t just the model name. CGI stamps a product identification label on the frame head or the sash edge, and that label carries the series code, the glass makeup, and the manufacturing date, which is what you need to match a replacement part correctly.

Here’s the compatibility gotcha most homeowners hit: CGI has updated its roller assemblies, balance systems, and locking hardware across production years, and a part that fits a 2012 Estate 6000 sash may not seat correctly in a 2019 Estate 6000 frame. The inner channel depth changed by roughly a quarter inch on several lines. When we quote a part, we read the label first, then measure the channel, then match. On the OEM versus aftermarket decision: for structural components like sash locks and impact-rated weatherstripping, we recommend OEM because the tolerances are tested with the specific aluminum extrusion. For rollers and glides, a quality aftermarket equivalent from a supplier like Prime-Line often performs as well and costs 30 to 40 percent less. We’ll show you both options on paper before we start.

Signs Your CGI Window Installation Is Failing

• Sash sticks or binds at the midpoint of travel. This usually means the roller assembly has worn unevenly or the aluminum track has flexed out of square. In Boca Raton, salt air accelerates roller corrosion faster than inland locations, and we see it most on east-facing elevations near the Intracoastal.
• Condensation between the glass panes. A failed seal on an impact-rated IGU. Once the desiccant inside the spacer bar is saturated, the fog won’t clear. The glass unit needs replacement, not the frame.
• Water streaks or staining on the interior sill after rain. Weep holes clogged with sand and salt residue, or the sill flashing was never pitched correctly at the original install. This is a water management failure, and ignoring it in Boca’s wet season rots subsills and drywall fast.
• Crank operator turns freely but the sash doesn’t move. The gear teeth inside the operator have stripped, or the arm has disconnected from the sash bracket. This is repairable with a new operator kit matched to the CGI series.
• Visible gap between the sash and frame, or daylight at the corner. The weatherstripping has compressed beyond recovery or the sash has dropped out of alignment. For an impact-rated window, that gap also compromises the design pressure rating the product was tested for.

Replacement Cost & What’s Included

For hardware-level work, Boca Raton homeowners pay between $185 and $420 per window, which includes the part, the service call, the labor, and cleanup. Balancer and lock replacements sit at the lower end. Full sash re-glazing or an IGU swap runs $650 to $1,400 depending on glass size and whether low-E or laminated impact glass is required. A full window unit replacement with tear-out and new flashing runs $1,100 to $2,800 per opening, and that spread covers the difference between a fixed picture window and a large operable impact unit with laminated glass.

What drives the range is the CGI series, the size of the unit, whether the existing frame is square enough to reuse, and accessibility. Second-story openings with stucco returns cost more than ground-floor sliders. Every quote is line-itemed on paper before we start, with the part cost separated from the labor, and the work carries our Done Right Promise. Both manufacturer warranty layers get registered in writing before the truck leaves your driveway.

DIY or Call Us?

There are things an owner can check safely. Confirm the product label is legible, note whether the sash is visibly out of square with a level, and clear debris from the exterior weep holes with a stiff brush. That’s honest diagnostic work, and it helps us quote faster. What we’d discourage is any attempt to remove an impact-rated sash without a second set of hands. These units are heavy, the balancer springs are under tension, and a dropped sash on a Boca patio deck does not end with a trip to the hardware store. If the pane is not true, the job is not done, and redoing a botched DIY sash pull costs more than the professional install would have.

If you’re looking at a CGI part that’s fighting you, call (561) 264-1337 and describe what you’re seeing. We’ll tell you over the phone whether it sounds like a hardware swap or a full unit job.

FAQs