Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Glass Railing Systems in Boca Raton: What to Know First
We service CWS glass railing systems throughout Boca Raton, and most repairs run between $180 and $640 depending on the failure. A typical CWS railing job takes one visit, usually under two hours, and we quote a firm price before any work begins. You’ll get a real answer from a real person when you call (561) 264-1337.
This page is for homeowners in Boca Raton who own CWS railings, CWS pool fencing, or CWS interior glass rails and want to know what’s actually wrong with them, what it should cost to fix, and whether the job is worth doing at all. We’re an independent CWS service provider. We work on their products every week and we know where they fail.
How CWS Products Fail - and How We Fix Them
- CWS frameless glass railing with loose top caps. The aluminum top rail on CWS frameless systems pulls loose at the splice joints over time, especially on balconies that catch the afternoon Atlantic breeze. The set screws back out, the cap lifts, and water gets into the channel. We re-tap the threads, replace corroded screws with marine-grade stainless, and re-seal the cap with a UV-stable bead that holds through summer.
- CWS pool fence gates that sag and won’t latch. CWS pool enclosures in Boca Raton take a beating from humidity and irrigation overspray. The self-closing hinges wear, the gate drops a quarter inch, and suddenly it won’t pass a child-safety inspection. We replace the hinge cartridge, square the gate back to frame, and test the self-close and latch from both directions before we call it done. If the frame itself has moved, we re-shim and re-anchor rather than just adjusting the hinge and walking away.
- CWS interior glass railing with cloudy or delaminated panels. Interior rails don’t see sun, but they do see cleaning chemicals and years of hand oils at the stair line. Clouding at the panel edge usually means the laminated interlayer is breaking down. We can often replace just the affected panel, matched to the existing glass tone and thickness, without touching the surrounding rail structure. If CWS’s current production no longer matches what’s on your wall, we source an aftermarket panel cut to spec and have it tempered locally.
- CWS spigot-mounted glass rail with a shifted or wobbly post. The spigots, those small metal bases that hold the glass, are a known weak point on exterior CWS installs. The anchor bolts loosen in the concrete, or the spigot itself develops hairline cracks at the neck. We pull the glass, re-set the spigot in epoxy anchor, torque the bolts, and reset the panel with fresh gaskets. If the spigot is cracked, we replace it - never glue, never shim.
- CWS cable railing systems with snapped or frayed cables. Cable rails on coastal Boca Raton properties rust from salt air even when they’re advertised as stainless. We replace failed runs with 316 marine-grade stainless cable, tension to spec, and re-sleeve the termination points. On CWS systems where the OEM cable is no longer available, we match the diameter and strand count with an aftermarket equivalent that meets the same tension rating.
Our CWS Glass Railing Systems Process
Here’s how a CWS job goes at TruePane, from the first call to the last wipe-down.
- 1
You call, a person answers. We ask what the railing is doing, where it is, and whether it’s poolside, interior, or deck-mounted. We schedule a time that actually works and show up.
- 2
We inspect the entire run, not just the one bad spot. A loose cap at one end often means stress at every joint. We check the full rail line, the anchors, the glass edges, the gate hardware if there’s a gate.
- 3
We put the fix on paper. OEM part where it matters and where it’s available; quality aftermarket where the OEM part isn’t worth the wait or the markup. You see the price before we touch anything.
- 4
We do the work. Glass out, hardware replaced or repaired, everything re-set and re-sealed. Uniformed technicians, background-checked, working like it’s their own mother’s house.
- 5
We test it the way the inspector would. Load on the glass, gate swing and latch, cable tension. If the pane is not true, the job is not done.
- 6
We clean up and leave you the paperwork. What we did, what we used, what the warranty covers, and our number if anything ever shifts.
What CWS Glass Railing Systems Costs in Boca Raton
Most CWS repairs in Boca Raton fall into these ranges. Prices are a guide, not a guarantee - every job gets a written line-item quote before work starts.
- Single spigot replacement, glass re-set: $180-$260
- Top cap re-fastening and re-sealing per linear section: $140-$220
- Gate hinge replacement and re-squaring: $190-$310
- Single glass panel replacement, framed or frameless: $320-$640
- Cable replacement per run with marine-grade stainless: $120-$240
What moves the price: glass thickness and tempering, how many anchors have failed, whether we’re matching existing hardware or replacing it, and how accessible the run is. Balcony work over a second-story line in Royal Palm Yacht & Country Club costs more than ground-level pool fencing in Boca Teeca. Call (561) 264-1337 for an exact quote - the estimate is free and the price we quote is the price on the bill.
Why Boca Raton Homeowners Call TruePane Windows & Doors for CWS Work
We’ve been doing windows and doors in Palm Beach County since 2008, and that count includes CWS railings. Dale Kessler grew up in Boca Teeca, learned glazing at Palm Beach State College, and built this company to stand behind every job in writing. Our Done Right Promise covers the work, no fine print and no arguing. Both manufacturer warranty layers get registered in writing before we leave your driveway. And because we’re an authorized installer for more than a dozen lines, including, and PGT, we can put side-by-side options on paper when a CWS repair doesn’t make sense. A live person answers our phone 24 hours a day. That’s not a call center. That’s us.
FAQs
CWS manufacturer warranties cover materials and defects, not the labor to remove and re-install faulty components. As an independent CWS service provider, we work in ways that don’t invalidate remaining manufacturer coverage - we match OEM specs, keep documentation, and register what needs registering. Call (561) 264-1337 and tell us what you have; we’ll tell you straight what’s covered and what isn’t.
Yes, in most cases. We match glass thickness, tone, and edge profile. For older CWS installations where the original glass is no longer manufactured, we have local fabricators cut and temper the panel to the exact dimensions. The hardware we match or replace with equivalent aftermarket parts where the OEM line has been discontinued.
We repair what’s repairable and replace what isn’t. If the glass is intact and the anchors are sound, a targeted repair usually restores the railing to original condition for a fraction of replacement cost. If the run has multiple failed spigots, corroded hardware throughout, or glass that’s delaminating in several panels, full replacement may cost less than chasing repairs. We’ll give you both numbers on paper and let you decide.
Most CWS repairs get scheduled within the same week you call. A loose cap or a wobbling spigot is quick; a custom glass panel takes a few extra days for fabrication. If it’s a safety issue, like a pool gate that won’t latch, we move it up. Call (561) 264-1337 and tell us what’s happening.
No. The quote we give you is the price you pay. If we open up the assembly and find something hidden, like deteriorated concrete under a spigot, we stop and talk to you before any work continues. No surprise line items. No change orders buried in the fine print.
If you own CWS glass railing systems in Boca Raton and something doesn’t feel right, call (561) 264-1337. We’ll talk through what you’re seeing, give you a straight answer, and schedule a free estimate if the job needs eyes on it.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boca Raton and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.