Simonton Sliding & Patio Doors Nationwide | TruePane Windows & Doors

Simonton Sliding & Patio Doors: The Boca Raton Owner’s Guide

Simonton sliding and patio door parts replacement in Boca Raton typically runs $145 to $420 for rollers, handles, locks, and weatherstripping, with full door replacement between $1,800 and $4,600 installed depending on size and glass package. We stock Simonton-compatible parts on our trucks and most roller or lock swaps take under an hour. You usually find the problem the way our Boca Raton customers do: the door still looks fine from across the room, but it takes both hands and a hip check to move it, or the latch no longer catches without lifting the panel.

Call (561) 264-1337

Simonton built their sliding doors with a reputation for holding up in Florida humidity, but the moving parts wear first. The rollers flatten, the vinyl tracks groove, and the latch hardware corrodes faster within three miles of the Intracoastal. Dale Kessler grew up in Boca Teeca and has replaced enough Simonton rollers in waterfront homes to know exactly what salt air does to a zinc-plated wheel after eight seasons.

Which Simonton Models This Applies To

Simonton’s sliding door lines share a lot of hardware DNA, but not everything swaps freely. The main families we service in Boca Raton are the Impressions 9800 series, the Reflections 5500 and 5050, the StormBreaker Plus for impact-rated openings in coastal zones, and the older ProFinish and DaylightMax lines still common in homes built from the late 1990s through about 2015. Each series uses its own roller housing height and stile profile, which matters more than most homeowners expect.

Here is the gotcha we see weekly in this market: a Simonton door from 2003 and a Simonton door from 2019 may share the same width, but the roller assembly changed from a stamped steel bracket to a nylon-housed tandem wheel, and the old part will not seat in the new door without shimming that eventually fails. The reliable way to identify what you have is the white or silver label on the fixed panel’s top rail, which carries the series number and sometimes the order code. If that label is gone, we match by stile width and roller housing pocket height, measured with the panel off. We carry OEM Simonton parts where the spec still exists, and for discontinued hardware we use quality aftermarket equivalents that meet the original roller diameter, axle length, and housing tolerance. We will tell you which one we are quoting and why.

Signs Your Simonton Sliding & Patio Doors Is Failing

• The panel drags or scrapes along the track. This is almost always a flattened roller wheel or a wheel that has seized on its axle. In Boca Raton, fine beach sand works into the bearing and grinds it until the wheel stops turning and starts skidding.
• You have to lift the panel to lock it. When the rollers collapse far enough, the panel drops below the strike plate line. Lifting to close is a sign the roller assembly is done, not the frame.
• The latch catches but the door still moves a quarter inch when locked. The keeper on the jamb has worn, or the mortise lock’s hook no longer reaches. This is a security issue as much as a nuisance.
• Water or daylight shows under the door when it is closed. The threshold cap or the interlock weatherstripping has compressed or torn. In a Boca Raton rainy season, that gap is an invitation to water damage.
• The screen door jumps the track or will not stay in place. Simonton screen rollers share part numbers with the main panel on some series, but not all. The screen’s smaller wheels wear twice as fast because the screen gets used more often.

Replacement Cost & What’s Included

For a Simonton slider in Boca Raton, roller replacement runs $145 to $220 per panel including the parts and the service call. Handle and lock sets run $95 to $185 installed. Weatherstripping and threshold cap replacement runs $90 to $160 per door. If the panel itself is fogged or the frame is racked, you are looking at glass replacement or a full door, and we will tell you that straight before quoting parts on a door that has bigger problems.

• Roller assembly replacement (per panel): $145-$220 installed
• Handle and lock set: $95-$185 installed
• Weatherstripping or threshold cap: $90-$160 installed
• Screen roller replacement: $75-$130 installed
• Full Simonton slider replacement (typical 72×80, non-impact): $1,800-$3,100 installed
• Impact-rated Simonton slider replacement (typical 72×80): $2,900-$4,600 installed

Every quote we give in Boca Raton is a written line-item price before work starts. You will see the part number, the part cost, and the labor separately. That comes from Dale Kessler’s founding rule: if it isn’t square and it isn’t sealed, it isn’t done. The work is covered by our Done Right Promise, and both manufacturer warranty layers get registered in writing before our truck leaves your driveway.

DIY or Call Us?

A sliding door panel is heavy, and removing one without the right lift-and-tilt sequence will chip the glass or bend the frame. We have seen homeowners in Boca Raton buy a $30 roller set online, spend a Saturday fighting the panel out of the track, and call us anyway with a cracked corner and a door that no longer latches. That $30 part becomes a $900 glass order.

What you can safely do is clean the track, check whether the problem is debris rather than a collapsed roller, and note which panel drags. What you should not do is pull a Simonton panel by yourself, especially on a second-story lanai or a door wider than six feet. If you are in Boca Raton and the door is fighting you, call (561) 264-1337 and we will send a background-checked, uniformed technician who has done this hundreds of times.

FAQs