Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Custom Windows & Doors in Boca Raton: What to Know First
We’re an independent Andersen service provider in Boca Raton, and custom window and door work on Andersen products is a specialty of ours, not a sideline. Most custom Andersen jobs in Boca Raton, whether it’s a specialty-shaped window, an oversized glass panel, or architectural grilles and SDLs, are measured, quoted, and ordered within a week, with installation typically scheduled inside of three to six weeks depending on the factory lead time. Pricing runs honest, not cheap: a custom Andersen window in this market generally runs $900 to $2,400 installed, and custom doors start around $2,200 and can reach $6,000 or more for a true architectural unit. If you own an Andersen product and you need custom work done right the first time, call (561) 264-1337.
This page is for the homeowner who already knows Andersen makes a solid window. You’re not shopping for the cheapest bid. You’re trying to figure out who in Boca Raton can actually measure, order, and set a custom Andersen unit without a crooked frame, a fogged seal, or a door that binds by August. That’s us.
How Andersen Products Fail, and How We Fix Them
- Andersen 400 Series casement windows: operator hinge wear and sash sag. In Boca Raton’s salt air, the zinc-plated hardware on the 400 Series casement holds up, but the operator arms themselves wear at the pivot points after 12 to 18 years. The sash sags a quarter inch at the lock point, the seal breaks, and you feel a draft. We don’t just replace the operator. We re-square the sash, replace the weatherstripping, and reset the hinge track so the new hardware isn’t fighting a frame that’s already out of true.
- Andersen A-Series custom shapes: corner seal failure on radius and arch units. Custom shape windows, arches, circles, trapezoids, are built with mitered corners that carry a heavier sealant load than a standard rectangle. After 10 to 15 years in coastal humidity, the corner seals on A-Series units can compress and separate, letting in condensation between the panes. The fix is a full-glaze rework of the sash, not a caulk bead over the top. We disassemble the sash, clean the channel, and re-glaze with a sealant rated for South Florida’s UV load.
- Andersen 200 Series gliding patio doors: roller and track degradation from sand and salt. In beachside Boca Raton neighborhoods like Boca Teeca or the communities off A1A, the track rollers on 200 Series gliders pick up sand and grit, and the nylon wheels flatten after five to seven years. The door starts to grind and then sticks. We pull the panel, inspect the track for scoring, replace the rollers with OEM or a quality aftermarket equivalent, and realign the door so it glides without binding, even in July humidity.
- Andersen E-Series windows: weatherstripping compression loss on oversized units. E-Series, the architectural line, is often specified for large fixed windows and custom configurations. On oversized units, the weatherstripping along the operable sash can compress unevenly because the sash is heavy and the framing carries more deflection over time. You get air leaks at the top corner. We replace the weatherstripping, check the sash deflection with a straightedge (that’s the difference between a guess and a fix), and adjust or reinforce the frame as needed.
- Andersen storm doors: closer arm and threshold wear on entry doors facing east-west sun. Boca Raton afternoon sun is brutal on anything facing west. Andersen storm door closers lose their hydraulic charge, the arm loosens at the bracket, and the threshold seal flattens. We replace the closer with a commercial-rated unit, re-anchor the bracket into the jamb (not just into the trim), and set a new threshold so the door seals tight and doesn’t flap in a breeze.
Our Andersen Custom Windows & Doors Process
Every Andersen custom job we do in Boca Raton follows the same sequence, and we write it out so you know what to expect before you commit.
- 1
Call and conversation. A live person answers, 24/7. You describe the window or door, the room it’s in, and what’s going wrong. We ask about the age of the unit, any leaks, and whether you’re in a high-floor or coastal zone. We schedule the site visit.
- 2
Measurement and inspection at your home. We measure every opening twice, with a laser and a tape, and we inspect the existing frame, the reveal, the rough opening, and the condition of the surrounding stucco or siding. A measurement that’s off by an eighth of an inch on a custom Andersen unit turns into a six-week delay and a window that doesn’t fit. We don’t rush this.
- 3
Parts and line decision, side by side on paper. If the work is repair rather than replacement, we lay out the options: OEM Andersen parts versus quality aftermarket, with the cost difference and the warranty difference written down. You decide with facts in front of you, not a phone-call summary. If it’s a replacement, we quote the Andersen line that fits the home and the budget, and we show you comparable lines from other manufacturers we’re authorized to install so you know you’re making an informed choice.
- 4
The work itself. We remove the old unit, correct any rough-opening issues, set the new window or door square and level, shimmed and sealed to Andersen’s installation spec. We don’t skip the flashing detail, and we don’t bury a crooked frame in caulk. If the pane is not true, the job is not done.
- 5
Testing and cleanup. We operate the window or door through its full range, check the locking points, and confirm the seals. We register both manufacturer warranty layers in writing on the spot, then walk you through what we did and what to look for.
- 6
The Done Right Promise. If anything isn’t done right, we make it right, no paperwork, no arguing. That’s the standard on the first visit and the baseline for every callback.
What Andersen Custom Windows & Doors Costs in Boca Raton
Here’s what we see across Boca Raton, from Boca Teeca to The Sanctuary to the communities west of the Turnpike. These are honest ranges we quote on paper, with no change orders tacked on after the fact.
- Andersen 400 Series custom-sized casement or double-hung, installed: $850 to $1,500 per window depending on size, glass package, and the condition of the rough opening.
- Andersen A-Series custom shape window (arch, radius, trapezoid), installed: $1,800 to $3,400, with the mitered corners and custom glazing driving the cost.
- Andersen 200 Series gliding patio door replacement, installed: $2,200 to $3,600, including track, roller, and threshold work.
- Andersen E-Series architectural window or door unit, custom configuration, installed: $3,500 to $7,000 and up for oversized panels and impact-rated glass.
- OEM Andersen hardware or weatherstripping repair on an existing custom unit: $180 to $450 depending on parts and access.
What moves the price: the glass package (impact-rated is the big one in Boca Raton’s hurricane zone), the size and shape of the unit, the condition of the rough opening, and whether you’re on a first floor or need scaffolding for a second-floor install. Call (561) 264-1337 for a free estimate, and we’ll put the numbers in writing.
Why Boca Raton Homeowners Call TruePane Windows & Doors for Andersen Work
We’ve been serving Palm Beach and Broward communities since 2008 through a heritage of craft and community commitment, and Dale Kessler founded TruePane in 2008 with a rule that still holds on the whiteboard: if the pane is not true, the job is not done. We’re background-checked, uniformed technicians who measure twice, register both warranty layers before the truck leaves your driveway, and stand behind the work with a Done Right Promise. No paperwork fights. No fine print.
We’re authorized installers for more than a dozen manufacturer lines, and while is a specialty of ours, we also work daily with, PGT, and CGI. That matters if your Andersen unit isn’t the only window or door in the house that needs attention, or if you want a side-by-side quote between an Andersen unit and a comparable line before you spend five figures on an architectural window. You’ll see the numbers on paper, and you’ll know exactly what you’re buying. Call (561) 264-1337 for a free estimate.
FAQs
Yes, most Andersen parts for units made in the last 25 to 30 years are available, either as OEM or quality aftermarket, including operators, weatherstripping, roller assemblies, and custom sash components. Older units, especially pre-2000 400 Series, may require a full-glaze rework or a replacement sash rather than a simple part swap. We’ll tell you what the parts situation is before we order anything. Call (561) 264-1337 and we’ll verify availability for your specific unit.
As an independent Andersen service provider, we do not void factory warranties when we perform repairs using manufacturer-compliant methods and OEM or approved aftermarket parts. We register both warranty layers in writing before the truck leaves, so there’s no question about what’s covered and who stands behind the work. Call (561) 264-1337 for a free assessment of your unit and warranty status.
If the sash is sagging, the seal is broken, or the hardware is worn, repair is often the right call and typically costs $180 to $450 for hardware and weatherstripping work on a custom unit. If the frame is rotted, the glass is fogging between the panes, or the unit is 20-plus years old in a coastal zone, replacement usually makes more sense and starts around $850 for an installed custom-sized 400 Series window. We’ll show you both options on paper. Call (561) 264-1337 for a straight answer.
We typically complete the measurement and order within a week of the first call, and custom Andersen units generally arrive in three to six weeks depending on the factory schedule. We’ll give you a realistic timeline when we measure, and we’ll be there when we say. Call (561) 264-1337 to start.
Yes, impact-rated Andersen custom windows and doors are a standard part of our work in Boca Raton, and we’re familiar with the wind-load requirements and Miami-Dade product approvals that apply here. We recommend impact-rated glass on any new custom unit facing east or west in coastal Boca Raton, and we’ll show you the comparable options on paper. Call (561) 264-1337 for a free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boca Raton and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.