Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Impact Windows & Doors in Boca Raton: What to Know First
We repair and replace Andersen impact windows and doors in Boca Raton as an independent Andersen service provider. Most Andersen impact repairs take us a single visit, and a full replacement of one opening typically runs one to two days once the unit arrives. Our pricing is fixed before we start, not after. If you own an Andersen impact window or door that’s binding, fogging, or not closing square, call (561) 264-1337 and we’ll tell you what you’re looking at.
This page is for homeowners in east Boca, Boca Teeca, Woodfield Country Club, and the waterfront communities along the Intracoastal who bought Andersen because it was a good window and need it working like one again. We’ll show you what fails, what it costs, and how we stand behind the fix.
- Andersen impact service in Boca Raton: most jobs done in one visit, replacements scheduled once your unit arrives
- Independent, not factory: we work on Andersen every week but we’re not an Andersen-authorized dealer
- Free estimates: (561) 264-1337, answered by a person, any hour
How Andersen Products Fail - and How We Fix Them
- E-Series impact casements that won’t latch square. In Boca Raton, salt air works on the stainless hinge screws and the steel reinforcement clips inside the sash. The sash sags a sixteenth of an inch, the keeper misses the strike, and the homeowner thinks the frame warped. It didn’t. We pull the sash, check hinge wear, replace the worn hardware with OEM spec parts, and reset the reveal. Most of these leave latching like new the same afternoon.
- 400 Series impact French doors that bind at the top corner in summer. Andersen’s French impact doors carry a lot of glass. When the sill flashing under the threshold was set on a slab that wasn’t dead level, the active panel drifts with the humidity and starts dragging. We shim and reset the hinge-side jambs, adjust the Astragal, and the door swings clean. This is a frame-alignment problem, not a door problem, and it’s the most common one we see in Boca Raton homes built in the 1990s and early 2000s.
- Impact-rated glass units with seal failure at the bottom edge. Andersen’s impact glass is laminated, so a fogged unit doesn’t just look bad, it means the laminated interlayer has been exposed to moisture and the edge seal has let go. It happens more in Boca because the morning dew sits on south-facing frames, bakes off, and cycles the seal every day for years. We replace with new laminated impact units matched to the frame’s design pressure rating. You don’t patch a seal that’s already failed.
- Coastal-corrosion at the weep holes and bottom track of gliding impact doors. Andersen gliding doors drain through small interior channels. When those channels clog with sand and salt crust, water backs up into the bottom track and starts corroding the rollers. The symptom is a door that suddenly feels heavy. We pull the panel, clean the track and weep system, replace the rollers if they’re pitted, and verify drainage before we put it back.
- Impact storm doors where the hydraulic closer has sheared its mounting screws. These get slammed in the wind and the closer’s bracket fasteners eventually give way. Homeowners sometimes run out and buy a generic closer from the hardware store and wonder why the door fights them. We install the right closer with proper backing and adjust the latch so the door seats without slamming. It’s a twenty-minute fix we see at least twice a week during Boca’s storm season.
Our Andersen Impact Windows & Doors Process
- 1
You call, a person answers. We set a time, confirm the address, and show up uniformed, on schedule.
- 2
We inspect the opening and the product. We measure twice, check for frame settlement, salt corrosion, and any damage to the flashing or track. We don’t quote from pictures.
- 3
We lay out the parts decision in writing. Where Andersen’s OEM hardware is available and appropriate, we use it. Where a proven aftermarket part outperforms OEM at a lower cost, we show you both options side by side on paper and let you choose. No mystery line items.
- 4
We do the work. Whether it’s a roller replacement or a full impact window swap, the same technician who quoted the job is the one turning the screws.
- 5
We test the opening. We open and close it, check the reveal, check the seal, and make sure it drains. If the pane is not true, the job is not done. That’s not a slogan at TruePane. It’s the rule on the whiteboard.
- 6
You get both warranty layers registered in writing. Manufacturer warranty on the product, workmanship guarantee from us for 90 days, stated durations on the sheet before we leave your driveway.
What Andersen Impact Windows & Doors Costs in Boca Raton
| Job | Typical Cost Range |
|---|---|
| Impact casement hinge and latch reset (single window) | $185 - $320 |
| Bottom track and roller replacement (gliding impact door) | $240 - $410 |
| Laminated impact glass unit replacement (single sash) | $680 - $1,350 |
| Full impact single-hung window replacement (installed) | $1,200 - $2,200 per opening |
| Full impact French door replacement (installed) | $3,800 - $7,500 per opening |
The biggest cost variables are the size of the opening, whether the frame is salvageable, and which Andersen series you have. A 200 Series replacement is a different number than an E-Series with custom sizing. Florida building code in Boca Raton also requires impact-rated installations to meet current design pressure ratings, so if you have an older Anderson unit that’s below current code, we’ll tell you before we touch it, not after. Call (561) 264-1337 and we’ll put exact numbers on paper, free.
Why Boca Raton Homeowners Call TruePane Windows & Doors for Andersen Work
We’ve been serving Boca Raton and the surrounding communities since 2008, and we’re not a franchise. Dale Kessler learned fenestration at Palm Beach State College in Lake Worth and spent more than two decades setting and sealing windows across Palm Beach County before starting TruePane. When you call us about your Andersen impact door, you’re getting a second-generation glazier’s work backed by the Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, and no fine print to hide behind.
We carry the knowledge for more than a dozen manufacturer lines, including Pella, PGT, and CGI. If your Andersen product is no longer the right fit, we’ll show you alternatives on paper, side by side, measured for your exact opening. Live people answer our phone 24 hours a day, seven days a week, because that’s what a company that plans to be here in thirty years does.
FAQs
Most Andersen impact windows can be repaired rather than replaced, and the decision comes down to the frame, not just the glass. If the frame is square and the sash isn’t corroded through, we repair it. Full replacement makes sense when the frame has settled, the design pressure rating is below current code, or the cost of multiple repairs exceeds half the price of a new unit. Call (561) 264-1337 and we’ll inspect the opening and explain exactly what you’re looking at.
No, not when the repair is done with proper parts and proper method. We use Andersen OEM-spec parts where the warranty matters most, and we register your warranty layers in writing as part of The Keystone Standard. Independent service does not automatically void a warranty; bad installs do. That’s the problem TruePane was founded to fix.
Common laminated impact glass units for Andersen products are usually drop-shipped to us in seven to ten business days from our Florida suppliers. Custom E-Series openings with unusual sizing or color-matching can take three to four weeks. We don’t promise same-day and we don’t leave a boarded opening. We schedule your replacement date before we order and you know the date before the glass arrives.
Impact-rated glass is laminated, tested, and labeled for a specific design pressure. Impact-resistant is a looser term that usually means a window with impact glass in a reinforced frame, but hasn’t necessarily passed the same testing. In Boca Raton, building code requires impact-rated or code-approved shutters for new installations and major replacements in wind-borne debris zones. We’ll tell you what your product actually is, because the label is the only thing that holds up in an insurance claim.
Yes, when the scope requires it. Impact windows and doors are structural openings, and Boca Raton’s permitting office requires a permit for replacements that change the design pressure rating or structural framing. We pull the permit, schedule the inspection, and make sure the job passes. If a contractor tells you a permit isn’t needed on an impact replacement in Boca Raton, get a second opinion. Call (561) 264-1337 for a free estimate and we’ll cover the permit requirements for your specific job.
If your Andersen impact windows or doors need the kind of attention only a careful hand can give them, you can call us at (561) 264-1337 for a free estimate. We’ll come out, measure, put the numbers on paper, and register your warranties in writing before we leave. If it isn’t square and it isn’t sealed, it isn’t done. That’s our rule and we live by it, because Dale Kessler put it on the whiteboard years ago and we haven’t found a reason to erase it yet.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boca Raton and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.