Andersen Window Replacement Nationwide | TruePane Windows & Doors

Andersen Window Replacement: The Boca Raton Owner’s Guide

Andersen window replacement in Boca Raton typically runs $450 to $1,400 per window installed, depending on the series and whether you’re replacing the sash, the glass, or the full frame. We stock Andersen-compatible sashes, balances, glass packs, and hardware on our trucks, and most part swaps are done in a single visit. If you’re reading this, you probably noticed a sash that won’t stay up, condensation inside the glass, or a crank that spins without moving the window. Those are the three calls we get most often.

Call (561) 264-1337

TruePane is an independent service provider and not affiliated with Andersen Corporation. We carry OEM Andersen parts alongside quality aftermarket equivalents, and we’ll show you both on paper before any work starts.

Key Takeaways:

• Installed Andersen replacement pricing in Boca Raton runs $450-$1,400 per opening
• We stock common Andersen 200 Series, 400 Series, and A-Series replacement parts on the truck
• Salt air and humidity in Boca Raton shorten balance and seal life compared to northern climates
• Most Andersen part replacements are finished the same day, with both warranty layers registered in writing

Which Andersen Models This Applies To

We work on the full Andersen line: 100 Series, 200 Series, 400 Series, A-Series, E-Series, and older Narroline and Perma-Shield windows that are still in plenty of Boca Raton homes built in the 1980s and 1990s. The most common replacements by far are 400 Series tilt-wash sashes and 200 Series gliding window rollers, because those are the two lines that got installed heavily during the Boca construction boom.

Here’s the compatibility gotcha most homeowners don’t know: Andersen changed balance shoe designs between the 400 Series generations. A 1996 400 Series double-hung uses a different balance cartridge than a 2015 model with the same exterior width. The same thing applies to gliding door rollers on the 200 Series versus the Perma-Shield gliding models. If you buy a part by “Andersen double-hung” without checking the serial number etched on the frame, there’s a good chance it won’t seat correctly. We pull the etch number or the glass marking and match it against manufacturer spec before ordering anything.

For OEM versus aftermarket on Andersen specifically: the glass packs and balances should be OEM. Andersen’s low-E coatings are built to a spec that cheap glass packs don’t match, and in Florida the UV load will show the difference in two or three years. Hardware like cranks, locks, and lift handles can be quality aftermarket without any real downside, and we carry both. We also stock replacement parts for Pella, and PGT windows, but Andersen is the make we see most in the Boca Raton market.

Signs Your Andersen Window Replacement Is Failing

• Sash drops or won’t stay open. The balance system has lost tension. In Boca Raton, the salty coastal air corrodes the spring mechanisms faster than the manufacturer’s average lifespan suggests. This is a balance replacement, not a full window job.
• Fog between the glass panes. The seal on the insulated glass unit has failed. Once moisture gets inside the glazing, the low-E coating starts to degrade. Replacement of the glass pack is the fix, and it’s the most common Andersen repair we quote in Palm Beach County.
• Crank spins without moving the window. The operator gear has stripped, usually because the sash was forced against corroded track or the window was cranked too hard past the stop. Casement operator replacement is straightforward and typically under an hour.
• Hard to lock, or the lock won’t catch. Over years of settling, the sash drops slightly out of alignment. Often this is a keeper adjustment or a lock replacement, but we check the corner welds first. A split weld means the sash is done.
• Water staining on the interior sill after heavy rain. This one is serious. The flashing or the sill gasket has failed, and the water is getting behind the frame. You need a tech who will pull the sash and check the perimeter, not just caulk the outside and leave.

Replacement Cost & What’s Included

For Andersen window replacement in Boca Raton, plan on these installed ranges:

• Glass pack replacement (insulated unit only): $280-$620, depending on size, glass coating, and whether it’s impact-rated
• Balance or spiral balance replacement: $160-$320 per sash, including labor
• Casement operator and hinge replacement: $190-$400
• Full sash replacement (clad wood or Fibrex): $380-$800
• Complete window replacement including frame: $900-$1,400

Every estimate includes parts, labor, haul-away of the old part, and your warranty registration in writing before our truck leaves your driveway. The Keystone Standard means both manufacturer warranty layers are logged in your name, with durations stated on paper. No verbal handshake, no “we’ll file it later.” You get a fixed price before we start, and that’s the price on the bill.

A note on Boca Raton permitting: a part-for-part replacement of a sash, balance, or operator does not require a permit. A full-frame replacement that changes the opening size does. We pull all required permits and schedule inspections, and we don’t consider the job complete until it passes.

DIY or Call Us?

There are things you can safely check before picking up the phone. If a casement window won’t crank, run a flat screwdriver along the track to clear any debris or old lubricant buildup. If a sash won’t stay up, check that the tilt-latches are fully seated in the track. Those are diagnostic steps, and they might save you a service call.

What we’d rather you not attempt is disassembling a double-hung balance or a casement hinge. Andersen balances are under spring tension, and when they let go, they take a chunk of the frame or a chunk of your hand. The same goes for removing an impact-rated glass pack you plan to “just re-glaze yourself.” A 6-foot impact window sash weighs more than most people expect, and if it drops on the tile, you just bought yourself the full-frame replacement you were trying to avoid. For anything past cleaning and lubrication, call (561) 264-1337 and we’ll make the trip.

How Long Will the Job Take?

Most Andersen part replacements take 60 to 90 minutes from the moment we start up the truck to the moment we walk your property one last time. A full sash replacement runs about two hours. A full-frame replacement with old Navarretine-style rough opening adjustment can take half a day, but that’s the exception, not the rule.

Do You Stock These Parts in Boca Raton?

Yes. Our trucks carry common Andersen balance cartridges, casement operators, lift handles, and lock assemblies specifically because Boca Raton homeowners don’t want to wait two weeks for a part to ship from Minnesota. If we need something unusual, we usually have it in three to five business days, and we’ll tell you up front which one it’s going to be.

Is It Better to Repair or Replace the Whole Andersen Window?

If the frame is square and the sash is sound, a part replacement is almost always the right call. Andersen frames hold up exceptionally well in Florida’s climate when they were installed correctly. The thing that fails is the moving parts and the glass seals. Unless the frame corners are pulling apart or the sill has rotten wood under the cladding, you’re better off replacing the component than the entire unit. We’ll give you a straight answer either way, and we’ll show you the condition we’re seeing while we’re quoting it.

Will the Price Change Once Work Starts?

No. The quote you approve is the price you pay. The only exception we’d ever present is if we open a wall and find structural damage that was hidden from every angle we could see, and in that case we stop, show you a photo, and get your approval before anything else happens. You’ll never find a surprise line item on our bill. That’s the square deal, and it’s the way Dale Kessler has run the company since the first truck rolled out.

Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boca Raton and nearby areas.

If your Andersen window is giving you trouble, call (561) 264-1337 and schedule a free estimate. If it isn’t square and it isn’t sealed, it isn’t done.