Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Windows & Doors in Lighthouse Point, FL | TruePane Windows & Doors
We provide independent PGT window and door service serving Lighthouse Point, FL, from weatherstripping and roller swaps to full WinGuard impact replacements. What makes our PGT work different here is simple: we know how this city’s canal-dense, salt-heavy air destroys window hardware faster than most manufacturers’ coastal specs account for. If your PGT units are binding, fogging, or failing wind mitigation inspection, call (561) 264-1337 and we’ll tell you straight what’s wrong and what it takes to fix it.
Why Lighthouse Point Residents Choose Us for PGT Service
We’ve been pulling PGT units out of Lighthouse Point homes long enough to know which failures repeat and which parts are worth saving. We’re not a manufacturer service arm and we don’t pretend to be. We’re an independent shop that stocks genuine PGT factory parts when the glazing or impact system calls for them, and we’re not shy about recommending marine-grade aftermarket hardware when the OEM component is the thing failing early. The difference between a technician who works PGT systems daily in Lighthouse Point and one who reads the catalog is knowing that a stock roller cartridge won’t survive three summers on a canal lot. Dale Kessler, our owner, cut his teeth on Palm Beach County window work back when jalousie glass was still the upgrade on the block. He’s the one who insists every PGT job here gets looked at twice: once for the window, once for the environment it’s sitting in.
Common PGT Windows & Doors Problems We Solve in Lighthouse Point
- Corroded cam locks and keepers on WinGuard casement and awning windows. We see this on units that are only seven to ten years old, even thermally broken frames. The problem is the chloride load in Lighthouse Point’s canal air, which eats the factory stainless lock bodies far earlier than inland homes would ever see. We replace them with 316-grade marine stainless hardware and adjust the strike so the sash seats square.
- Failed laminated glass seals on SpectraGlaze fixed windows. Elevated humidity off the canals finds its way into older frame corners through micro-gaps, and once moisture gets between the lites, the glass fogs and the impact rating becomes a question mark. We assess the frame before we quote the glass. If the frame is still sound, we reglaze. If it isn’t, we say so.
- Pitted and binding roller assemblies on PGT 400 Series sliding glass doors. These are the doors that feel gritty when you slide them, and it’s not dust. It’s oxidation on the roller axles. On canal-side homes we routinely swap the factory rollers for sealed marine-grade stainless cartridges. The door should glide with two fingers, not a shoulder.
- Warped or stuck interlocking meeting rails on WinGuard single and double hung units. A lot of Lighthouse Point’s concrete block homes went up in the 1960s and 1970s, and the original rough openings weren’t dead square. When an impact unit gets forced into a racked opening, the meeting rails bind. We shim and square the opening before we set the new sash, which is the only way the lock will engage cleanly.
- Salt-film buildup and failed perimeter seals on non-impact PGT patio doors. Older PGT aluminum sliders that weren’t spec’d for marine exposure develop a white crust along the threshold and the bottom sweep. Once the sweep fails, canal air moves through the gap year-round. Sometimes a reseal and new sweep fix it. Sometimes the frame tells us it’s done.
PGT Service in Lighthouse Point: What Local Conditions Mean for Your Equipment
Here’s the thing that separates Lighthouse Point from almost anywhere else in Broward County. Nearly every street in this city dead-ends at a canal. Look at a map and count the fingers of water reaching into the neighborhoods off NE 26th Avenue and NE 31st Court. That means a PGT window on a house two blocks from the Intracoastal isn’t getting salt air from one side. It’s getting it from two, sometimes three. The air carries chloride off the water, it moves between the homes, and it settles on window hardware the same way it settles on patio furniture. We’ve pulled PGT units off interior lots in Lighthouse Point that showed more lock corrosion than units sitting directly on A1A in other towns. The practical takeaway: if you own PGT products here and your insurance company only asks for impact certification, that’s the floor, not the ceiling. We consistently retrofit PGT casements, sliders, and hung windows with stainless lock bodies, marine-grade rollers, and thermally broken frames even when the paperwork doesn’t demand it. Because we’ve seen what ten years of canal air does to hardware that was spec’d for “coastal” but not for a city where the water wraps around on three sides. Lighthouse Point is a marine environment, and your windows either get built for it or they fail early.
PGT Models & Products We Service in Lighthouse Point
We work on the current PGT lines and the ones still hanging in older Lighthouse Point homes: WinGuard Vinyl Impact Series, WinGuard Aluminum Impact Series, SpectraGlaze Classic Series, and PGT 400 Series Sliding Glass Doors. For impact glazing and structural components, we use genuine PGT factory parts because those systems are engineered and tested as a unit. For corrosion-prone hardware like rollers, handles, and weatherstripping on canal homes, we’ll tell you when a marine-grade aftermarket part will outlast the OEM. Our PGT sales & service work covers repair first, replacement when the frame or glass can’t be saved. If an older non-impact PGT unit shows frame corrosion down to the rough opening, the only safe path is full replacement with a current HVHZ-compliant PGT product.
PGT Service Pricing in Lighthouse Point
Here’s what drives cost on PGT work in Lighthouse Point. A hardware swap on a WinGuard casement runs differently than a full reglaze on a fogged SpectraGlaze unit, and both land in different territory than replacing a PGT 400 Series door with corroded tracks. The condition of the rough opening matters more than most homeowners expect. A 1960s concrete block opening that’s out of square adds shimming and framing time. A Lighthouse Point Door Installation with marine-grade upgrades costs more in parts but less over the next ten years. We write line-item quotes on paper before any work starts, and we register both manufacturer warranty layers before the truck leaves. Call (561) 264-1337 to schedule a free estimate, and we’ll walk through exactly what your PGT units need and what it will cost to make them right.
Serving Lighthouse Point, FL - Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in Lighthouse Point
Compliance depends on the specific product approval, the condition of the glazing, and whether the frame and hardware have held up to Lighthouse Point’s canal air. Some early 2000s WinGuard units still carry valid Florida Product Approval and pass wind mitigation inspection. Many don’t, especially if the laminated glass shows any edge clouding or the locking hardware has been replaced with non-matching parts. We verify the approval paperwork, inspect the unit in place, and tell you whether you’re compliant or one failed inspection away from a problem. Call (561) 264-1337 and we’ll look at your specific windows.
The answer is chloride. Salt-laden air from the canals settles on the roller axles and tracks, and every cycle of the door grinds that salt into the bearing surfaces. On a canal-front home in Lighthouse Point, the moisture and salt load is constant, not occasional. Factory rollers simply aren’t built for that duty cycle. We replace them with sealed marine-grade stainless cartridges that shrug off the environment and keep the door sliding clean.
Sometimes the glass is the only problem and the frame is still square and sound, especially on newer units. On older SpectraGlaze windows in Lighthouse Point, the humidity that fogged the glass has usually also gotten into the frame corners, and the aluminum is starting to pit internally where you can’t see it. We inspect the frame before we quote. If the frame is solid, we reglaze. If it’s not, we tell you straight and quote a replacement. Call (561) 264-1337 for an exact assessment.
Yes, and the reason is Lighthouse Point’s canal density. Delray Beach has oceanfront exposure, but its inland blocks sit a good distance from salt water. In Lighthouse Point, the canals thread water within yards of nearly every home, which means the window hardware lives in a marine microclimate. We upgrade to 316-grade stainless lock bodies and hinges on PGT casements here as standard practice, not as an upsell.
The most common failure we see is missing or mismatched documentation, followed by hardware that doesn’t match the approved product listing. Inspectors in Lighthouse Point know their wind mitigation requirements, and a PGT French door with a replacement handle set that isn’t listed on the Florida Product Approval will fail, even if the door itself is solid. We register both warranty layers in writing and make sure every replacement part matches the approval documents. Call (561) 264-1337 if you need a pre-inspection check.
Service Areas Near Lighthouse Point
We run PGT service calls throughout coastal Broward and southern Palm Beach County. If you’re in PGT service in Boca Raton, we’re there. Same for PGT service in Hillsboro Beach, Deerfield Beach, Coconut Creek, and Gulf Stream. Our Lighthouse Point service area coverage means we know the marine conditions on every street from the Intracoastal inland. If your PGT windows or doors need attention anywhere nearby, call and we’ll get you on the schedule.
Book Your PGT Service in Lighthouse Point Today
If your PGT windows are binding, fogging, or failing inspection, don’t wait for the next storm season to find out what’s wrong. Call (561) 264-1337 and we’ll send a uniformed technician for Lighthouse Point Window Installation, look at the units, and give you a written line-item quote. A real person answers the phone. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lighthouse Point and coastal Broward County. Dale grew up in Boca Teeca and has spent more than two decades measuring, setting, and sealing windows across Palm Beach and Broward counties, with a name built on square frames and installs that hold through hurricane season.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.