Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Margate
Window installation in Margate comes with a requirement most homeowners don’t learn about until the permit desk tells them. Every replacement window here must carry a Miami-Dade Notice of Acceptance (NOA) or a Broward County Product Approval. No exceptions for inland lots. Margate sits entirely inside the High-Velocity Hurricane Zone, one of only two counties in the US with that designation, and the Building Division on Banks Road enforces it. We know Margate’s code, its 1960s concrete-block housing stock, and its tight side yards. If you’re planning a window replacement, call (561) 264-1337 for a free estimate, and we’ll walk you through what’s actually required before you spend a dollar.
Why TruePane Windows & Doors Is Margate’s Preferred Window Installation Company
We don’t treat Margate like a satellite town we pass through on the way to larger jobs. Our crews know the neighborhoods south of Atlantic Boulevard, the condo clusters off Rock Island Road, and the older single-family streets near Winfield Boulevard where homes sit 10 to 15 feet apart. Window Installation is what we do, and in Margate it means working within noise-hour ordinances, staging without blocking a shared driveway, and knowing which product lines the Banks Road inspectors will approve without a back-and-forth.
We’ve been led by Dale Kessler since he founded the company on a simple rule: if the pane is not true, the job is not done. That applies to the install itself and to the way we leave your side yard. Margate customers have told us the same thing for years: the crew showed up when they said they would, covered the interior floors, and didn’t leave a neighbor fuming about a blocked carport. A live person answers our phone 24 hours a day, 7 days a week. That matters when a window goes out at 8 p.m. and you want to know if it can wait until morning.
Our Window Installation Services in Margate
Impact-Rated Single & Double Hung Windows
This is the workhorse replacement for Margate’s aging housing stock. Most homes built between the mid-1960s and mid-1980s still have original aluminum single-hung or jalousie windows that meet no current HVHZ standard. We install single and double hung units from Simonton and Ply Gem with NOA numbers printed on the frame, low-E glass, and argon fill. On a typical Margate block off Margate Boulevard, replacing four to six of these takes one day, with the old units removed carefully enough that the stucco return stays intact.
Casement Windows
Casement windows seal tighter than sliders in the humidity Margate gets ten months a year. The compression seal along the full frame keeps conditioned air in and damp outdoor air out better than a sliding sash ever will. They’re also a common swap when a jalousie opening gets reframed. The old louvered units leave a rough opening that often needs a new header and jamb before a casement can sit square, and we do that reframing rather than shimming the difference and hoping it holds through a storm.
Fixed & Picture Windows
Some Margate living rooms face the street, and a large fixed picture window is the cleanest way to open that wall up while still passing HVHZ code. We order fixed units with impact-rated laminated glass specified to the exact wind load Margate requires. That’s not a place to save money with an inland-rated product. The permit office will reject it. When we quote a picture window in Margate, the quote includes the NOA documentation so there’s no surprise at inspection time.
Awning Windows
Awning windows hinge at the top and open outward, which makes them good for Margate’s frequent afternoon downpours. You can leave them cracked in the rain without water pooling on the sill. They’re common in bathrooms and kitchens of the older Margate homes, where original jalousie windows let water in every time a storm rolled through. Our installation includes proper sill flashing angled to drain outward, which is the detail that keeps the shared wall between you and your neighbor dry during the wet season.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Margate
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. For Margate specifically, we work with a lot of Simonton, Ply Gem, and Jeld-Wen units because they carry Miami-Dade NOA approvals in the sizes common to 1960s concrete-block layouts. We don’t ask you to pick from a single catalog. We quote manufacturer lines side by side on paper so you see the exact product, glass package, and warranty term before you commit. And both warranty layers get registered in writing before the truck leaves your driveway.
Common Window Installation Problems We See in Margate Homes
- Non-NOA-rated windows from out-of-county suppliers. Contractors price a job with windows sourced from states that don’t test for HVHZ wind loads. The Banks Road Building Division fails the inspection, and the homeowner has a torn-open exterior wall and a stop-work order while the crew disappears.
- Blocked driveways on tight 1960s lots. Margate homes off Winfield Boulevard and NW 57th Avenue often sit 10 to 15 feet apart. A work trailer parked across a neighbor’s carport triggers a code complaint that halts the job mid-install. We stage inside an enclosed trailer and keep the side access open.
- Jalousie-to-casement swaps that skip the header. Removing a 1960s aluminum jalousie and dropping a modern casement into the same opening without rebuilding the old single-track header leads to seal failure within two rainy seasons. Water gets in at the shared party wall, and the owner is paying for the job twice.
- Aged seals and glazing failing from inland humidity. Margate sits about 10 miles from the Atlantic, so salt spray isn’t the enemy it is in Pompano Beach. But the humidity and UV still destroy aged aluminum frames and seals. Fogged glass with intact frames is the number one call we get from Margate homeowners who assume they need a full replacement when they might only need new insulated glass units.
Pricing for Window Installation in Margate, FL
A typical impact-rated single hung window in Margate runs $850 to $1,400 installed, depending on the opening size and the glass package. Casement windows run higher, $1,100 to $1,800, because the hardware and the compression seal are more involved. A fixed picture window can land between $900 and $2,200 based on square footage and whether we’re reframing a jalousie opening or working with a clean rough opening. These are realistic Margate numbers, not sticker prices designed to get a call and then climb. Factors that affect cost: opening condition, stucco repair, whether a header needs rebuilding, and whether a shared wall means extra masking and coordination with a neighbor. We quote fixed and itemized, and the price on the written quote is the price on the invoice. Call (561) 264-1337 for a free estimate, and we’ll come out and measure every opening twice before we talk numbers.
We Also Serve Cities Near Margate
TruePane handles window installation in Margate and the surrounding Broward communities, including Coconut Creek, Coral Springs, Pompano Beach, and Deerfield Beach. The code requirements change the minute you cross into Palm Beach County, but our crews know the difference and we quote accordingly. If you’re a few blocks outside the Margate line, you’ll still get the same Done Right Promise and the same live voice on the phone.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Margate
Yes. Margate sits entirely within Broward County’s High-Velocity Hurricane Zone, one of only two counties in the country with that designation. Every replacement window must carry a Miami-Dade Notice of Acceptance (NOA) or a Broward County Product Approval, regardless of how far inland the house is. Neighboring Palm Beach County cities just north of the county line have different standards, which is why out-of-area contractors sometimes try to install windows that will never pass a Banks Road inspection. Call (561) 264-1337 and we’ll show you the NOA documentation for any window we quote.
We pull the permit with the Margate Building Division on Banks Road before any work begins, and we schedule the inspection ourselves after the install is complete. For a shared-wall lot, we also give your neighbor written notice of the work dates and keep noise within Margate’s 7 a.m.-7 p.m. weekday window. The permit is included in our quote, and we don’t invoice the job until the inspection passes. Call (561) 264-1337 to get the process started.
Rarely, and we won’t pretend otherwise to make a bid look cheaper. The 1960s jalousie frames were built for louvered glass, not a modern double-hung sash. Most of the time the old single-track header and jambs have rot or deflection, and setting a double-hung into that opening without rebuilding will fail within two rainy seasons. We quote the reframing honestly, and the written quote is what you pay. Call (561) 264-1337 for a straight answer on your specific opening.
By staging everything inside our enclosed trailer and treating the side yard like it belongs to the neighbor, because on an 8-foot setback it practically does. We lay drop cloths through the house, mask the work area, and sweep the shared walkway at the end of each day. On a recent job off Winfield Boulevard, a neighbor’s carport sat just 14 feet from the wall we were working on, so we cordoned off the side driveway, kept all flashing tape and frames inside the trailer, and finished the caulk and trim before the 7 p.m. noise cutoff. That’s how we work in Margate. Call (561) 264-1337 and we’ll walk your lot before we quote.
Not always. Fogged glass means the seal on the insulated glass unit has failed, and in many Margate homes the frame itself is still square and serviceable. We can replace just the glass unit in most cases, keeping your existing frame and saving you the cost of a full replacement. That said, an original 1970s aluminum frame won’t meet current HVHZ code regardless of the glass, so if you’re ever going to sell or if you want the insurance benefit of impact-rated windows, full replacement is the honest recommendation. We’ll show you both options and let you decide. Call (561) 264-1337 and we’ll come out and look.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Margate, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.