Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Hillsboro Beach
Custom windows and doors in Hillsboro Beach come with a specific set of demands most window companies never have to face. This barrier island is only a few hundred feet wide in places, so every home in Hillsboro Beach sits bracketed between the Atlantic Ocean and the Intracoastal Waterway. That means dual salt-spray exposure, Broward County High-Velocity Hurricane Zone (HVHZ) code requirements, and NOA-approved product mandates on every elevation, not just the oceanfront. Our Custom Windows & Doors team has worked on condos and estates all over this town, and we know what a permit opens up once the old frames come out. Call (561) 264-1337 for a free estimate and we will walk you through exactly what your building requires before we quote a single number.
Why TruePane Windows & Doors Is Hillsboro Beach’s Preferred Custom Windows & Doors Company
We are the company homeowners in Hillsboro Beach call after they have been burned once. Original aluminum single-pane windows from the 1960s and 1970s do not come out clean here. Frames are pitted from decades of salt, sashes seize in their jambs, and weatherstripping crumbles on contact. Our crews have handled enough of these tear-outs to price them honestly the first time instead of pretending the job is a simple glass swap.
Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. We put both manufacturer warranty layers in writing and register them before the truck leaves your driveway. Every job carries our Done Right Promise. If something is not right, we make it right. No paperwork fights, no arguing, no fine print that covers neither.
Background-checked, uniformed technicians measure every opening twice. We quote manufacturer lines side by side on paper so you see exactly what you are buying. And when a Hillsboro Beach permit inspection comes back with a frame issue or a flashing deficiency, we write the fix into an allowance with photos and a signed change order before we touch anything. You are never surprised by a line item after the fact.
Our Custom Windows & Doors Services in Hillsboro Beach
Custom Shape Windows
Hillsboro Beach homes, especially the newer estates and the older condos with architectural features, frequently call for non-rectangular openings. Arches, radius tops, trapezoids, and eyebrow windows all require templated fabrication and NOA-compliant impact glazing. A custom arch window on a 1970s condo near Hillsboro Boulevard is not a stock item, and we do not try to make one fit a standard opening. Our shop fabricates to the exact rough opening dimensions we measure on site.
Commercial Storefront Glazing
Some Hillsboro Beach properties include ground-floor commercial spaces or amenity buildings with storefront-style aluminum framing. Salt spray here attacks storefront mullions and gaskets just as aggressively as it attacks residential windows. We replace and reglaze storefront systems with materials rated for the HVHZ zone, including thermally broken aluminum and impact-rated laminated glass. For commercial work in Hillsboro Beach, NOA documentation matters at permit time, and we supply the paperwork with every job.
Curtain Wall Systems
Larger mid-rise condominium buildings in Hillsboro Beach often use curtain wall systems on lobby elevations or penthouse levels. These systems carry enormous wind loads when a nor’easter funnels through Hillsboro Inlet, and older curtain wall from the 1970s was rarely designed for the dual-direction exposure this town actually gets. We fabricate and install replacement curtain wall with PGT or CGI impact glazing, engineered for the specific wind zone and building height, with field measurements taken before any glass is ordered.
Architectural Grilles & SDLs
Condo boards in Hillsboro Beach frequently require grille patterns to match the original building aesthetic. Simulated divided lites (SDLs) give you the divided-light look without sacrificing impact performance. We install true SDLs inside the insulated glass unit as well as exterior grilles where the building’s appearance code requires them. For Hillsboro Beach buildings with a specific architectural review board, we coordinate on pattern, profile, and finish before fabrication begins.
Oversized Glass Panels
Hillsboro Beach estates built in the last twenty years often specify oversized panels that push the limits of what impact-rated glass can do. A 10-foot-by-10-foot fixed lite facing the Intracoastal still has to pass Broward County HVHZ permitting, which means NOA-approved laminated glass and framing engineered for the panel’s actual size, not a stock chart. We have installed panels larger than most window companies will quote. The engineering, the lifting plan, and the permit paperwork all get handled in-house, and the glazing arrives on site with the NOA sticker attached to every lite.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hillsboro Beach
We are an authorized installer for more than a dozen manufacturer lines, and in Hillsboro Beach the brands that matter are the ones with NOA approvals filed and current with Miami-Dade County. We regularly specify PGT, CGI, and ES Windows for Hillsboro Beach projects because those manufacturers maintain the documentation Broward County inspectors ask for at permit closeout. We stock gaskets, rollers, weatherstripping, and common hardware for these lines locally, which means a service call on a seized PGT slider in Hillsboro Beach does not wait a week for parts. If you have a different brand installed and want to know whether it is legal to reuse or repair, call us. We will tell you straight.
Common Custom Windows & Doors Problems We See in Hillsboro Beach Homes
- Corroded aluminum frames and seized sashes. Decades of dual salt-spray exposure on both the ocean side and the Intracoastal side pits original aluminum frames until the sashes bind in the jambs. In Hillsboro Beach, this is the baseline condition on nearly every 1960s-to-1980s condo unit we open up, and it is the first clue that a full tear-out, not a glass swap, is coming.
- Failed insulated glass units with fog between the panes. Constant humidity and thermal cycling accelerate seal failure in older retrofits. Once the seal goes on an original single-pane retrofit in Hillsboro Beach, the unit fogs, the argon is gone, and the window no longer passes the building’s own appearance standards, let alone code.
- Water infiltration behind original stucco returns on west-facing elevations. Wind-driven spray from Hillsboro Inlet bypasses worn flashing and rots the rough opening behind stucco. Homeowners on the Intracoastal side assume they are sheltered, but nor’easters push rain across the entire width of the island, and west-facing Hillsboro Beach windows leak more often than oceanfront ones in our experience.
- Undersized framing and failed flashing tape at the rough opening. Once we pull the old window in Hillsboro Beach, we frequently find wood bucks that were never sized for an impact-rated unit. The permit triggers an upgrade to pressure-treated bucks, full sill pan flashing, and NOA-approved glazing, and that scope has to be written into the allowance before we proceed.
Pricing for Custom Windows & Doors in Hillsboro Beach, FL
A typical custom window replacement in Hillsboro Beach runs $2,800 to $6,500 per opening for NOA-approved impact-rated units with full tear-out and new framing. Architectural grilles and SDLs add $400 to $1,200 per opening depending on pattern and profile. Oversized fixed lites facing the Intracoastal or the ocean typically land between $9,000 and $22,000 per panel, including engineering and permit work. Commercial storefront reglazing in Hillsboro Beach starts around $75 per square foot for laminated impact glass. Every estimate we write is a fixed, line-item quote. We walk the job, measure the openings, write the allowances for anything the permit will trigger, and you sign off before we order a single lite of glass. Call (561) 264-1337 to schedule your free estimate.
We Also Serve Cities Near Hillsboro Beach
Our crews work all over northern Broward and southern Palm Beach County. If you are in Boca Raton, Lighthouse Point, Coconut Creek, or Gulf Stream, the same team that handles Custom Windows & Doors in Hillsboro Beach covers your neighborhood too. Scheduling and dispatch run through our South Florida office, and our trucks carry the same NOA documentation kit on every job no matter which town the permit inspection happens in.
Serving Hillsboro Beach, FL - Our Local Coverage Area
We’re based in the Hillsboro Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Hillsboro Beach
Because Hillsboro Beach is a barrier island so narrow that every building sits within a few hundred feet of both the Atlantic and the Intracoastal Waterway. Broward County’s High-Velocity Hurricane Zone designation applies to every elevation in town, not just the oceanfront. Nor’easters funnel through Hillsboro Inlet drive wind-driven rain and salt spray across the full width of the island, which means your west-facing Intracoastal windows take the same storm loading as your east-facing oceanfront windows. The permitting office will not close out a window replacement without NOA-approved products on all elevations, and for good reason. Call (561) 264-1337 and we will show you the exact product numbers your building requires. Estimates are free.
In almost every Hillsboro Beach condo from the 1960s through 1980s, full tear-out is the only legal path. The original aluminum frames are usually so pitted from salt that they cannot hold a modern impact-rated unit, and the rough opening behind them was sized for the old narrow frame, not for an NOA-rated replacement. Once the permit is pulled, Broward County HVHZ code requires new pressure-treated bucks, impact glazing, and full sill pan flashing. We inspect first, show you what the opening actually looks like, and write the scope into an allowance with a signed change order before any demolition starts. Call (561) 264-1337 for a free inspection and honest pricing.
A permit-triggered upgrade in Hillsboro Beach typically adds $800 to $2,400 per opening, depending on what the old framing looks like once the window is out. That covers pressure-treated wood bucks sized for the impact-rated frame, new flashing tape and sill pan at the rough opening, and any stucco repair behind the original returns. We write that allowance into the contract with photos and a signed change order before we order glass. The work is not optional; if the building department requires it, you cannot close the permit without it. Our pricing reflects exactly what we have seen on Hillsboro Beach tear-outs, not a national average. Call (561) 264-1337 and we will walk you through your building’s specific scope.
Look for staining on the drywall or baseboard below the window, peeling paint on the interior sill, or a musty odor that worsens after heavy rain. In Hillsboro Beach, west-facing leaks often trace back to failed flashing behind the original stucco return. Wind-driven spray from Hillsboro Inlet pushes water against the building from the Intracoastal side, and once the old flashing tape degrades, the water gets behind the stucco and rots the rough opening. If you see any of those signs, do not wait. We inspect the opening, document the damage with photos, and write the repair into a fixed quote before we touch the wall. Call (561) 264-1337 to schedule an inspection.
Yes. Oversized panels in Hillsboro Beach require NOA-approved laminated glass and framing engineered for the actual panel dimensions and wind zone. We fabricate to field-measured openings and handle the engineering and permit paperwork in-house. A 10-foot-by-10-foot fixed lite facing the Intracoastal, for example, will run between $14,000 and $22,000 depending on whether you choose PGT, CGI, or ES Windows and what the structural engineer requires for the header and mullion reinforcement. We quote the full scope, including engineering and permit work, before we order a single lite. Call (561) 264-1337 for a free estimate on your oversized custom window project.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hillsboro Beach and surrounding South Florida communities with honest pricing and installs done right since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.