Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Door Installation in Boca Raton: What to Know First
Therma-Tru door installation in Boca Raton typically costs $2,800 to $7,500 for a full replacement, and most single-door jobs are finished in one day once the unit is on site. We’re an independent Therma-Tru service provider, which means we install and repair the doors without being tied to a manufacturer’s upsell list, and we quote the work honestly, labor and materials separated, before anything is ordered. If you own a Therma-Tru entry door in Boca Raton and it’s binding, sagging, or letting daylight through the weatherstrip, this page will tell you what’s actually going on and what it takes to set it right. Call (561) 264-1337 and a live person will answer.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds a good door. The frame, the polyurethane core, the alignment system. But after twelve or fifteen South Florida summers, specific things go wrong. We see the same handful of failures on Therma-Tru doors in Boca Raton homes, and each one has a fix that actually holds.
- Smooth-Star and RSL entry doors pulling at the hinge jamb. The slab is solid, but the frame was set in 2009 or 2011 and the original shim pack has compacted. The door drops a quarter inch, the lock misses the strike plate, and the weatherstrip wears uneven on the latch side. Our fix is a full re-shim and re-level, not a hinge bend. We pull the casing, reset the jamb plumb on fresh shims, and re-hang the slab so the reveal is even all four sides. The door closes with two fingers or it’s not done.
- Classic-Craft and Fiber-Classic sash doors showing core separation at the bottom rail. These are steel-skin doors with a wood-grain profile, and here’s what Therma-Tru’s own site won’t tell you: in Boca Raton’s humidity, the bottom rail can hold enough moisture to start the skin lifting from the frame, especially on west-facing front doors that get the afternoon sun then a daily rain shower. Once the skin separates, the door loses structural integrity and the lock no longer has firm purchase. We assess whether the door can be re-skinned and sealed or whether the slab itself needs replacement. We’ll tell you the honest answer on the first visit.
- Benchmark by Therma-Tru smooth-skin doors with failed corners on the frame. The door slab is fine, the frame is not. The corners were mitered and sealed with a factory joint that degrades in constant UV. Boca Raton front entries that face east or west eat that corner seal in eight to ten years. We recommend a frame replacement with composite corner blocks and mechanical fasteners, not just caulk.
- Therma-Tru multi-point lock systems binding after storm settlement. Homes in Boca Raton move. The soil is sand with a limestone shelf, and houses shift a few millimeters a year. On Therma-Tru doors with the multi-point hardware, that small shift binds the upper and lower shoot bolts against the keeper plate. Homeowners think the lock is broken. It usually isn’t. We realign the frame and adjust the keeper, and the lock works again without replacing six hundred dollars of hardware.
- Weatherstrip compression set on Therma-Tru doors in oceanfront and intracoastal homes. The salt air in east Boca Raton hardens the Q-Lon weatherstrip Therma-Tru uses. After five to seven years it’s no longer compressing back, so the door lets drafts through even when it’s closing square. We replace the weatherstrip with a marine-grade equivalent that holds its rebound longer near the water.
Our Therma-Tru Door Installation Process
Every Therma-Tru job we take in Boca Raton follows the same sequence. It’s not complicated, it’s just exact.
- 1
We measure the opening twice. Once with the existing door in place, once with the casing pulled back to see the rough opening. Foundation settling and stucco repairs change what’s behind the trim. We don’t trust the first number.
- 2
We assess what’s reusable and what’s done. Therma-Tru slabs can often be saved when the frame is the failure. We tell you plainly whether the door is worth rebuilding or should be replaced.
- 3
We quote on paper. Labor, materials, the specific Therma-Tru replacement parts or full unit, and a stated lead time. No change orders unless you ask for more work.
- 4
We set the door square and level. Shims get mechanically fastened, never stacked loose. The reveal is checked with a gauge, not an eyeball.
- 5
We seal against Boca Raton weather. Exterior-rated sealant and proper flashing so a driving rain off the Atlantic doesn’t find its way under the threshold.
- 6
We test and register everything in writing. The door opens and closes true, the locks align, the weatherstrip makes full contact. Then we walk you through what was installed and hand you the records. The Done Right Promise applies to the workmanship with no fine print. The Keystone Standard means both manufacturer warranty layers are registered in writing, with durations stated, before we leave your driveway.
What Therma-Tru Door Installation Costs in Boca Raton
Therma-Tru door installation in Boca Raton runs on honest, predictable numbers. The door itself is the biggest variable, labor is the second, and the condition of your frame is the third. Here’s what we see.
- Replacement door slab (standard Smooth-Star, custom-fit, installed): $1,200 to $2,400
- Full frame and door replacement (Classic-Craft or similar, single entry): $3,200 to $5,800
- Double door installation (Therma-Tru French or patio double units): $5,000 to $9,500 depending on glass package and hardware
- Multi-point lock realignment or adjustment (without new hardware): $250 to $600
- Weatherstrip replacement and threshold reseal: $180 to $400
What moves the price: the glass package, impact-rated versus non-impact slabs, custom colors and wood-grain texture, and whether the rough opening needs any rework. We quote fixed prices before any work begins and we don’t pad the bill after the fact. Call (561) 264-1337 for an exact estimate, it’s free and it takes a ten minute visit.
Why Boca Raton Homeowners Call TruePane Windows & Doors for Therma-Tru Work
TruePane Windows & Doors has served Boca Raton since 2008 through our founder’s heritage as a second-generation glazier. Dale Kessler started this company in 2008 because he watched too many Boca homeowners get a low bid and a loose frame, and decided someone in this market ought to stand behind the work with more than a handshake. Every one of our installs is backed by the Done Right Promise. If the pane is not true, the job is not done. Our techs are background-checked and uniformed, and they learn Therma-Tru doors from doing the work, not from a slide deck. If a Therma-Tru door isn’t the right long-term answer for your situation, we also work with PGT, CGI, CWS, and ES Windows, so you never get steered toward a brand we happen to overstock. And when you call (561) 264-1337, a live person answers, 24 hours a day, seven days a week. No voicemail tree.
FAQs
Yes, in most cases. Therma-Tru doors carry a manufacturer warranty on the slab and frame, and an independent service provider performing proper installation does not automatically void that coverage. We document the work and keep records of what was done, the parts used, and the dates, which is what the manufacturer wants to see if there is ever a claim. If you have an existing Therma-Tru warranty, bring the paperwork to the estimate and we will review what’s covered before we touch anything. Call (561) 264-1337 for a straight answer.
We use genuine Therma-Tru parts when they’re available and when they’re the right part for the job, especially for warranty-sensitive components like multi-point lock hardware and factory weatherstrip. For some frame components, there are high-quality aftermarket options that actually hold up better in Boca Raton’s humidity and UV, and we’ll show you both on paper with the prices side by side. You decide with the facts in front of you.
A standard single-entry door replacement takes one day once the door unit is on site. If the frame needs rework or the opening has settlement issues, it can take a day and a half. Double doors and full custom orders are longer because of the manufacturing lead time, which we’ll state in writing before you commit. We’ll be there when we say.
That depends on the failure. If the slab is solid and the problem is the frame, the hinges, the alignment, or the weatherstrip, repair is almost always the smarter money. If the door skin is separating at the rail or the core has taken water, a new slab or full unit usually costs less over ten years than fighting the old one. We’ll measure, diagnose, and tell you the truth either way, never a push toward the bigger ticket. Call (561) 264-1337 and we’ll put eyes on it.
Not harder, no, but the combination of salt air, high humidity, and intense UV is harder on any door. What we see with Therma-Tru specifically is the weatherstrip losing its rebound faster near the coast and the bottom rail skin being more vulnerable on west-facing exposures. These are known issues with predictable fixes, and we account for them on every install, not just on the ones that have already failed.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boca Raton and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.