A TruePane company - serving Boca Raton, FL

CWS Roof Repair Nationwide | TruePane Windows & Doors

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

Single hungDouble hungHorizontal roller

Casement
Casement
Bay & bow
Bay & bow

Sliding glass doors

Entry doors
Entry doors

Impact garage doorsPGTCGI

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CWS Roof Repair in Boca Raton: What to Know First

Independent CWS roof repair in Boca Raton typically runs $350 to $1,900 depending on whether you’re sealing a single skylight frame or replacing a ridge vent assembly that’s been leaking through the decking, and most jobs are completed within three to five business days. We’re not the cheapest bid on the block, and we don’t try to be. We quote the actual fix, use parts that last, and stand behind the work in writing with our Done Right Promise.

Call (561) 264-1337

This page is for homeowners in Boca Raton who own a CWS roof product and have already discovered that the manufacturer’s website doesn’t tell them what’s actually failing, why it failed, or what a real repair should cost. If that’s you, call (561) 264-1337 and you’ll get a live person who can talk specifics, not a voicemail tree.

How CWS Products Fail and How We Fix Them

  • CWS standing seam panels with broken clip fasteners. This is the most common CWS roof failure we see in Boca Raton, and it’s almost always on homes built between 1998 and 2006. The original panel clips fatigue from thermal expansion cycling, the seam lifts by an eighth of an inch, and wind-driven rain from a summer squall gets behind the panel. The fix is replacing the failed clips with a heavier-gauge aftermarket clip rated for coastal wind zones, then re-seaming the panel. We use aftermarket clips from S-5! or a comparable rated source, not OEM clips that fail the same way in another eight years.
  • CWS ridge vent flashing separation at the gable ends. On CWS metal roof systems, the ridge vent end caps are sealed with butyl tape at the factory, and that tape hardens in the Florida sun. By year twelve or so it’s powder, and water wicks under the cap every time the wind blows out of the east. The repair is mechanical: we pull the cap, clean the seam, and reset it with a polyurethane sealant that stays elastic. OEM doesn’t sell the butyl tape separately, which is why so many Boca Raton owners get told they need a new ridge line when they just need a better sealant.
  • CWS skylight curb leaks on flat-roof sections. We see this on CWS aluminum skylight curbs over flat or low-slope roof sections, common in the Boca Teeca and Royal Palm Yacht & Country Club neighborhoods. The curb flashing lifts at the corners because the original installer used roofing mastic instead of a proper two-part flashing system. We strip the old mastic, check the curb for corrosion, and re-flash with peel-and-stick underlayment lapped onto the curb. This is a two-hour repair, not a skylight replacement, and we’ll tell you that honestly.
  • CWS gutter apron missing on the eave line. A surprising number of CWS roofs in Boca Raton were installed without a gutter apron, especially on custom homes where the fascia detail hid the gap. Without the apron, water wicks back under the drip edge and rots the fascia board over ten to fifteen years. The fix is pulling the first course, installing a proper aluminum gutter apron, and resetting the panels. It’s tedious work that most roofing crews skip because it doesn’t show from the ground. We do it because the rot doesn’t stop on its own.
  • CWS panel end lap fasteners backing out. On longer roof slopes, CWS panels lap end-to-end, and the lap fasteners are the weak point in a hurricane. After a few seasons of expansion and contraction, the fasteners back out slightly, and the lap opens just enough for capillary action to draw water uphill. The fix is removing the loose fasteners, inspecting the holes for corrosion, and resetting the lap with a larger-diameter fastener plus a butyl-backed washer. If the hole is wallowed out, we’ll add a blind rivet beside it and seal the old hole.

Our CWS Roof Repair Process

  1. 1
    Call and talk to a person. Call (561) 264-1337. A live person answers, 24 hours a day. We’ll ask what’s leaking, how long it’s been happening, and whether you’ve had anyone look at it before.
  2. 2
    We inspect the failure, not just the symptom. Our technician gets on the roof, finds the actual point of water entry, and documents it with photos. On a CWS job, we’re looking specifically at panel clips, lap fasteners, ridge caps, and the skylight curb area. No charge for the diagnostic when the repair follows.
  3. 3
    We put the parts decision on paper. Where OEM parts are the right call, we use OEM. Where OEM parts are known to fail short or aren’t sold separately, we use a heavier-gauge aftermarket alternative and explain exactly why. You see the two options side by side before anything gets ordered.
  4. 4
    The repair is done by a uniformed, background-checked technician. At minimum, the repair gets a water test with a hose at full pressure, not just a visual once-over. On the roof we’re checking lap seams, fasteners, and the seal around the repair while the test runs.
  5. 5
    We register the warranty layers in writing. We give you the repair warranty, the parts warranty, and the workmanship guarantee on paper before we leave the driveway. If something’s not right, we fix it under our Done Right Promise. No paperwork fights.
  6. 6
    We leave the roof cleaner than we found it. Debris bagged, gutter guards checked, and a note left on any other CWS issues we saw that aren’t urgent yet. We’d rather tell you now than surprise you in August.

What CWS Roof Repair Costs in Boca Raton

CWS roof repair pricing depends on what’s failed, how accessible it is, and whether the panel needs re-seaming or full hardware replacement. These are the ranges we quote most often in Boca Raton:

  • Single panel clip replacement at the ridge: $350 to $650. Two or three clips in the same seam: $550 to $950.
  • Ridge vent end cap re-seal, one gable end: $400 to $700. Both ends: $700 to $1,100.
  • Skylight curb re-flash and re-seal: $750 to $1,100. Corroded curb replacement: $1,300 to $1,600.
  • Gutter apron installation along a 30-foot eave line: $900 to $1,200, including panel reset.
  • Lap fastener reset, per seam: $300 to $550, depending on decking access and corrosion.

What moves the price in Boca Raton specifically is roof height and pitch. On a three-story Intracoastal home with a 7:12 pitch, the same lap fastener job costs more than it does on a single-story ranch in Woodfield Country Club because of hoisting, tie-offs, and safety setup. That’s the honest answer: labor safety requirements, not parts, are the swing factor. Call (561) 264-1337 for a free estimate and we’ll give you a written line-item quote, no change orders and no surprises later.

Why Boca Raton Homeowners Call TruePane Windows & Doors for CWS Work

Dale Kessler grew up in Boca Teeca and started TruePane because he spent two decades watching homeowners get handed a low bid and a loose frame. For a CWS roof repair, the attitude matters. We don’t sell quick patches. We don’t paint over a wet spot and call it a day. Every CWS repair is done by a technician who measures, tests, and re-tests before calling the job finished. If the pane isn’t true, the job isn’t done.

We also service PGT, CGI, ES Windows, and ECO Window Systems products in Boca Raton, which helps when a home has a mix of CWS skylights and another manufacturer’s impact windows above the roof line. Instead of calling two companies, you get one crew that understands the entire roof-to-wall connection. Our work is backed by the Done Right Promise and The Keystone Standard: warranty layers registered in writing, durations stated, before we leave the driveway. We’ve served Palm Beach County since 2008 through a heritage of craft and community commitment, and we’ll be here in thirty years to stand behind what we did today.

FAQs

Why Impact

Six Reasons Homeowners Choose TruePane Windows & Doors

Hurricane Protection

Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.

Energy Savings

Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.

Noise Reduction

Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.

Burglar Resistant

Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.

Insurance Savings

Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.

Property Value

A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.

Other Services

Other TruePane Windows & Doors Services

Reviews

What Neighbors Say About TruePane Windows & Doors

★★★★★

"Impact windows on the whole house. They handled the permit, the inspection, and gave me a folder with every approval number for the insurance company. My windstorm premium dropped enough to notice."

BBill T.
★★★★★

"Our bay window had rotted at the sill and two other outfits wanted to talk us into a flat picture window instead. TruePane rebuilt the opening and matched the original look. Neighbors have knocked on the door about it."

GGene A.
★★★★★

"French doors to the patio, custom size because this house was built in 1961 and nothing is standard. Measured twice, three weeks to fabricate like they warned, and the install day they laid runners over my floors without being asked."

MMarie S.
★★★★★

"A casement crank had stripped and the sash was swollen shut. The technician, Ray, fixed the crank on the spot and only then talked about replacement for the three windows that were genuinely done. That is why the whole street uses them now."

EEleanor G.
★★★★★

"Eleven windows replaced in two days. The crew chief, Marcus, showed me the level on every single frame before they caulked it. My wife noticed the street noise was gone before I did."

RRonald P.
★★★★

"Energy bill was the reason we called. They did not oversell - said the two worst walls of windows would do most of the work and we could stop there. Did those eight with the Low-E glass. August electric bill tells the story."

HHarold W.
★★★★

"Sliding door had been dragging for years. They quoted a repair first, said the track was shot, then priced the replacement both ways on paper. No pressure either direction. Door glides with one finger now."

CCarol M.
★★★★

"Quote was the price, which after three other bids that grew legs was worth something. Double-hungs went in clean, they hauled the old ones, and the registration paperwork for the warranty came in the mail like they said."

DDorothy K.
Need Windows & Doors help in Boca Raton? Licensed & insured · Free on-site estimates response · free estimates
Call (561) 264-1337
Local Service Coverage

Request a Free Estimate in Boca Raton

Tell us what you need - TruePane Windows & Doors responds fast. No obligation.

When you submit this form, you accept our Privacy Policy and consent to being contacted by phone, email, or text about your request, including by the independent contractors we may refer it to.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch